New .25 caliber slugs

For those of you interested in shooting slugs out of your .25 caliber air gun, I just got a new batch of slugs to test from one of the top manufacturers a couple days ago. What has got me excited is that I was given 10 different slugs to test ranging in weight from about 28 gr. up to about 38gr. with quite a few in the 28gr-34gr. range which will be perfect for gun’s that do not have power kits or special tunes. All of the slugs have either a flat or dished base and a pretty large hollow point which are both traits I’ve found shoot very well out of the Impact and RAW.

Because the weights or design of the slugs may change a little after this initial testing, I’m not allowed to mention the exact specifics. I can tell you that I shot a few last night to check velocities and in my gun the slugs in the 28gr.-31gr. range were able to be shot at over 1000fps. They shot most accurately at about 940-950fps out to 100yds. My gun is stock other than a delrin C3 bumper, a larger transfer port and modified probe. These velocities 940-960fps should easily be achievable out of stock Impact MKII’s, maybe Continuums and Crowns too?

Im going to test all of them tomorrow out to 100+ yds. and will share the results with the maker, then I can share them with you. If they all shoot as well as the other slugs he makes, it’s going to be great for .25 cal. owners!

Have a great weekend!

Stoti
 
Excited to hear your results Stoti. I have been waiting for the technology to catch up. 

Do you know the diameter of your transfer port? I hogged mine out a little but didn't want ruin something. I have a 3mm bumper behind the spring and Rowe put the power mods in so together I can get the KH to 940 +or- The RAW I would need to re-barrel, it's maxed at 900FPS

Dennis
 
I haven’t measured it but I can when I get home. It can actually be smoother and a little larger but I needed to order some Dremel bits. They arrived but I haven’t gotten to cleaning it up yet. I’ll let you know. Have you adjusted the reg on your RAW? I barely adjusted mine and it shoots the KH at 960 or something like that. I’ll have to check my notes but it’s shooting hard too.

1567891925_17708512965d7421d5c110f7.62645471_5FD8C275-B103-42AB-855C-BA60084F5D01.jpeg


Stoti


 
Sorry I'm late getting back Stoti. I sent it back to Martin had him go through it complete The only way I can get my RAW that fast is to re-barrel. This one is 3" shorter than standard. It's shoots 900with the 34g, KH right now so it may shoot the lighter slugs at proper velocity. I see how you worked the TP Does that cause any issues with the o ring?.



DDC