Need to de-ping my JTS Standard

[Nomadic Pirate 66]

The gun is farely quiet but the ping is huge, planning for a possible Mongoose hunt so I would like to de-ping the gun.
Back in the day I did one of those Vinyl tubes De-pingers for my Marauder, I hear a lot about the bottle brush one but never did one.

for those that did both,....which one is the most effective ?

Thanks in advance.

 

[wildcj5]

I have not done the bottle brush but have done the tubing. Usually I just use whatever plastic bottle cap I have around the house that fits.

I just put this in my AEA HP today. Ping it gone.

 

[Nomadic Pirate 66]

ahhh cool idea,...thanks

 

[Nomadic Pirate 66]

So, with the brush you just cut it a bit and slap it in there ? ...no special tricks ?

 

[Motorhead]

IIRC a Depinger from/for a Marauder fits.

 

[_CTAIRGUNNER_]

IIRC a Depinger from/for a Marauder fits.

Great news as I am contemplating picking up a Max after shooting one this weekend and really paying attention the rifle, at its price point I do not think theres a better rifle out there. We got shot after shot in the same hole off bags at 50 yards shooting 15.89

MY BIGGEST GRIPE IS THE DAMN PING!

 

[Motorhead]

A MAX is regulated and therefore does not suffer from air tube ping.
The current Standard is coming from factory with a de-pinger already within the air tube.

FYI

 

[_CTAIRGUNNER_]

A MAX is regulated and therefore does not suffer from air tube ping.
The current Standard is coming from factory with a de-pinger already within the air tube.

FYI

The max I shoot has a terrible ping literally my only complaint about the rifle, maybe spring bounce?

 

[Motorhead]

The max I shoot has a terrible ping literally my only complaint about the rifle, maybe spring bounce?

What we speak of as PING is caused by the noise an opening / closing poppet valve creates, with that sound wave traveling down the length of the air tube creating a resonance "PING" The regulator sits in the way and therefor blocks this sound from the primary air tube.

Now indeed hammer against poppet stem, spring within hammer can create a bunch of inner mechanical shot noise.
There are cures for that as well such as spring O.D. sleeves, Tighter spring guide and not metal ! as well as others.

 

[Nomadic Pirate 66]

Both my JTS are now having a slow leak ( I did put a brush into the Standard ).......I changed all the O-rings but they both still leaking, slowly.

 

[Motorhead]

Both my JTS are now having a slow leak ( I did put a brush into the Standard ).......I changed all the O-rings but they both still leaking, slowly.

The factory provided O-ring service kit are the same that gun was assembled with. And IMO they have proven to be of poor quality in hardness as well material having a short service life.

 

[_CTAIRGUNNER_]

The factory provided O-ring service kit are the same that gun was assembled with. And IMO they have proven to be of poor quality in hardness as well material having a short service life.

Unfortunate but easy enough to fix buying some quality orings

 

[Nomadic Pirate 66]

Yeah I have 2 kits of assorted O-ring both metric and SAE, guess one day I feel like it I might just reopen once again both guns.