Need the pictured "washer" in red for a Pro Sport. The parts listing calls it a "Cocking Lever Buffer" part #PS417. Pyramyd Air does not list it. Anyone know where to source this, or what the exact size is? Thanks for any help.
Or maybe I just bought the rifle and it was already broken, but thank you. Not to mention that it was broken into quite a few pieces, most of which are missing.I would say you need to get some measurements! Thickness, outside and inside diameter and head to Ace hardware. Find a nylon or delrin washer that's close as possible to those measurements. It's only there to prevent damage to the cocking arm when returning to battery position. Maybe been slamming it home a little to hard is what broke it.
Jim, Did you get the cocking arm buffer yet?Need the pictured "washer" in red for a Pro Sport. The parts listing calls it a "Cocking Lever Buffer" part #PS417. Pyramyd Air does not list it. Anyone know where to source this, or what the exact size is? Thanks for any help.
View attachment 559533View attachment 559533
Steve, thanks for your reply. No, not yet. Several folks here have provided links and all are in the UK. I called Pyramyd again, and they directed me to Air Venturi, whom I called, and they will have to reach out to Air Arms directly, because Air Venturi does not stock the part. If you have a resource you could share, that would be great. Thank you.Jim, Did you get the cocking arm buffer yet?
Steve
I have one in stock. Bought it years ago and never needed it. Message me your shipping info and it’s yours.Steve, thanks for your reply. No, not yet. Several folks here have provided links and all are in the UK. I called Pyramyd again, and they directed me to Air Venturi, whom I called, and they will have to reach out to Air Arms directly, because Air Venturi does not stock the part. If you have a resource you could share, that would be great. Thank you.