Need help with getting Omega tank filled

[Bantam540]

Hey everyone new to forum new to airgunning.

Hey guys I bought a Omega 18cu inch scuba tank. I can not find anywhere that can fill this tank. I am located in front Royal everywhere says they do not have the part that I guess would connect to the tank itself please I have not been able to shoot my air rifles at All. Need help please.

I have the bantam .25 Cal and the liberty 900 wood stock.

 

[Michael]

Show us a pic of the tank you wish to fill. Up close photos of the connections will help.

 

[bfd136]

Try finding a company that sells tanks to fire deptments. I think you need a din fitting

 

[Bob_O]

We need a pic for sure.

Once you know what you need, you can probably get it here:

https://www.pyramydair.com/a/Accessories/PCP_and_CO2_accs/PCP/Fittings_and_adapters/81

 

[Guest]

Strasburg has a paintball field. They can probably fill it. skylinepaintball.com

 

[Bruce]

Google dive shops for your area. I get mine filled in Frederick Md. which is a little far from you.

 

[elh0102]

Any dive shop should have the appropriate connector. 

 

[Erics]

That is a fairly small tank to have as your only source. I think most people with that tank have their own compressor or a larger tank to fill that one up. 

 

[Bantam540]

Most do not and the paintball field near me pevs can not as well and it is the Omega air tank sold my air guns of airzona I we'll try to upload a picture when I get home. Thank you for responses guys.

 

[Bantam540]

I do realize it. Is a small tank I have been looking into buying a compressor and wanted a field tank which I believe this to be perfect for just can't get it filled nor shoot my airguns and have had them since shortly after Black Friday. So I'm almost over it at this point .

 

[Bob_O]

That's your only fill source?

 

[Bantam540]

Yes sir that's it.

 

[Bob_O]

A tank is nice. But even a larger one like I have, 74 cu.ft., only gives me about five full fills on my Crown before I get only partial fills after that.

Yours might give you a couple full fills.

A small compressor like the Nomad II is nice, I just got one a month ago, but it's not for filling tanks.

Sounds like that might be the ticket for you, a small compressor to do most of the filling and keep the tank for the field.

 

[Bantam540]

This is what my plan was but I still can't find a way to fill the tank and am still trying to find the right small compressor I was thinking about the young Heng sorry for missing spelling that but don't want to damage my air guns thank you again.

 

[Bantam540]

This is my tank 

 

[Peskådot671]

That's a female DIN 300. Any dive shop should be able to fill your tank granted that they can fill to 4500 PSI. If they could only fill through an SCBA connection (CGA-347), then you're gonna need one of these;

Male DIN 300 to male CGA-347 adapter. 

They hook it up to the female CGA-347 

 

[lenweber2]

Most dive shops if not all can fill thru the Din fitting but may not get to the 4500# level. I don't see a whip, bleed valve or foster fitting. Dive shop's can also fill male to male fitting thru the foster.

 

[rctk1]

You wont damage youre guns if you have a good filter.

 

[Guest]

I think you could make this work.

https://www.ansgear.com/First_Strike_Scuba_Fill_Adapter_340_01_2925_p/fsscubafilladapter-340-01-2925.htmI

 

[Bantam540]

Sorry for the confusion what exactly do I need to purchase to be able to get it filled anywhere