Having some issues with the new fx impact m3. Barrel is long and basically unsupported. Seems like everytime i shoot it, it needs to be tweeked again. Is there some tips you experts can give me for consistent accuracy without constantly readjusting the scope?
Need help with fx impact m3
- Thread starter mlspence
- Start date
The carbon fiber stiffener may help with the barrel sag. I'm not familiar with all that sag. My 700mm barrel on my Maverick doesn't sag at all, but I had the carbon fiber sleeve added.
Upvote 0
There has to be something else going on loose scope rail, rings, scope, I'm running a 700 with a tension spacer and cf tube but my friends m3 doesn't have anything on it and it's dead on his is on just the orings inside
Upvote 0
I would check fps strings first. I glued my liner to fiber sleeve with anaerobic gasket maker it's dead nuts at 50. But most of my problem was plenum still filling during shoot. I have my reg over 160. I also removed one reg.
Upvote 0
Hi mlspense,
If this issue persists give us a call or e-mail we would like to ask a couple more questions and see if we can find the best solution that fits your needs.
Regards,
FX Airguns USA
Contact
Monday – Thursday 9 AM – 4 PM EST
Fridays 9 AM – 3 PM EST
Phone: +1 866 639 0772
[email protected]
Upvote 0