Need help, experts come in and help me solve it.

[Gavin777]

无法连接，是否需要适配器，在哪里可以买到？刚收到新枪，压力表显示为零，这正常吗？（没有要求商家放气）

 

[Airgun-hobbyist]

Looks like this will help, provided the threads are the same.

Stainless steel foster male to G1/8" BSP adaptor

Stainless steel foster male quick connect coupler with G1/8 BSP female treads + bonded seal

www.huma-air.com

 

[kevtan]

Yes its normal to ship pcp with near empty tank. Unscrew the quick disconnect from the blue filter housing and compare the threads of the fill probe. If they are the same then screw on the fill probe to the blue housing.

 

[kevtan]

Be careful to insert back the teflon flat seal in the blue housing and NOT over tighten the fill probe. If it leaks tighten more until the leak stop. If overtighten the teflon seal will flatten and seal off the hole.

 

[Emu]

Yes its normal to ship pcp with near empty tank. Unscrew the quick disconnect from the blue filter housing and compare the threads of the fill probe. If they are the same then screw on the fill probe to the blue housing.View attachment 361059ll

It is better to buy the female foster adapter. That will allow you to keep the probe in a place protected from air and dust and therefore o'rings will last you working the longer.

 

[Headshots]

Yes a female foster . Might grab some Teflon tape also. Tony at Talon tunes put one on my fill probe as a courtesy. Great place to purchase from.

 

[Headshots]

I did a work around on one that didn't come with the female foster. I'm no expert though.