I have two sets of Burris XTR Signature Rings that I want to mount to my Air Arms TX200 and Pro Sport. I would like to get good-quality dovetail to Picatinny adapters for the Burris rings. The Burris rings will only fit Picatinny adapters. I would like something as small as possible and not to introduce any MOA. Suggestions are very welcome. Thank you.
Need dovetail to Picatinny adapters for TX200/Pro Sport
- Thread starter thevinoman
- Start date
Best quality that I have found is eaglevisoncam.com in uk. Expensive but very well made and low profile. Shipping to US is fast and reasonably priced.
I have been pleasantly surprised by Mostrum of late.
I have been pleasantly surprised by Mostrum of late.
Upvote 0
The UTG spring loaded ones that go into the jaws/Clamp of picatinny rings work great. Inexpensive, easy, unobtrusive. 
Upvote 0
I've never used them on a Springer, but they're my goto option for PCPs. Burris are my first choice for rings...
Upvote 0
UTG® Universal Dovetail to Picatinny Adaptor
UTG® Universal Dovetail to Picatinny Adaptor Mount
www.leapers.com Upvote 0
Thanks for all the replies. Currently evaluating and likely going to go with the UTG rail above.
Upvote 0
Those rings are 1” UTG Pro low for reference. The rail fits perfect as it is one piece(slips on), no tilting etc.
Also the recoil stop holes go all the way through on the TX, it looks blocked but that is the trigger block. Don’t tighten the stop pin against it or you won’t get the trigger block back out. Use purple loctite 222.
Upvote 0
BKL would be my first choice on a springer. Their adapters don't require a stop pin and they don't introduce any cant
Upvote 0
I use this one. It clamps on permanently to the 11mm rail, and are very low.
eaglevisioncam.com
80mm 11mm/13mm Dovetail To Picatinny Rail Adaptor | Eaglevisioncam
These are 80mm 11mm/13mm Dovetail to Picatinny Adaptors Made from aluminium There are two ways of how you can use this product: Option 1: Take the side grab screws off, place the rail in your scope mount, then while you’re tightening your scope mount it will grab and hold your rifle’s Dovetail...
eaglevisioncam.com Last edited:
Upvote 0