BSA need bsa goldstar help

[Wr250r]

I got a cleaning brush stuck in the middle of the barrel. I'm looking at the video but it's a single shot.i seem to have a screw in the area where the screw driver is pointed. please help.

 

[willy]

Can ya put compressed air in and blow it out?

 

[xsarfc9x]

You need to fully remove the bolt to access the screws to separate the the hammer housing from the breech block. From there the barrel is easy to remove


Sub12s videos do a good job of walking thru

BSA R10 Disassembly and rebuild + Huma reg install

BSA R10 Disassembly and rebuild + Huma reg install

www.airgun101.com

 

[Wr250r]

thanks mine has the same bolt. I put it away.ill try again tomorrow. the wire brush has too go out the other end to get it out.I can't reverse it in the middle. I feel like a dummy.

 

[Scotty1]

thanks mine has the same bolt. I put it away.ill try again tomorrow. the wire brush has too go out the other end to get it out.I can't reverse it in the middle. I feel like a dummy.

That is totally something I would do …

 

[xsarfc9x]

A thin weed trimmer line or maybe a patch worm if u can get it past the brush.

 

[Motorhead]

You have a PM ...

 

[Wr250r]

I got it back together. I'll fill Sunday. the video for the r10 was the key. thanks