Need to plug a Prod gauge block for a project I'm working on. My understanding is that the threads are 1/8 NPT? Need a sanity check on whether this is will do the trick?
Need a sanity check on plugging Prod gauge block
- Thread starter UCChris
- Start date
I have found at least three thread sizes on gauges, there might be more!
So far 1/8 NPT, M10 and 1/8 BSP or possibly they are 1/8 BSPP.
So far 1/8 NPT, M10 and 1/8 BSP or possibly they are 1/8 BSPP.
Upvote 0
Jesus, really. I will try to measure the gauge that I pulled out. Thank you for the heads up!!!!
Upvote 0
Prod that I have has a large hole in the bottom usually bspp or bsp has a o-ring on it or seals at the bottom with a derlin seal mine had black Teflon tape to make it seal
Upvote 0
BSPP are parallel threads that will thread in all the way by hand and seal with either a dowty or oring. BSP are tapered thread similar to NPT.
Upvote 0