Need a Foster fitting extension hose

[outdooorgb]

My Four Uncles pump has a filter at the end that makes for a rigid 2-3" or so and this interfers with my moderator. I am forced to remove the moderator and want to stop that nonsense.

I there a hose with a male foster (into my pump) and just a regular female foster into my rifle (Avenger). I did search but am coming up blanks. Appreciate any advice on how to proceed.

Thanks,

Added a sketch

 

[Privateer]

like this?
https://www.amazon.com/Paintball-Ex...hvlocphy=&hvtargid=pla-4584138877011736&psc=1

 

[outdooorgb]

@Privateer

That might work. I'll do a little picture scale measuring when I get home later. Still looks rigid for a length but might be small enough diameter to clear. Thanks!

 

[rsfrid]

I use one of these on mine — https://myhighpressureair.com/extended-quick-coupler-elbow-assembly/

 

[Privateer]

It's like the Old Discovery rifles. Add a Moderator and you had issues.
Back then I changed the Male part on the Rifle to an angled part.
I'd bet with some research you could get the fittings to angle the fitting.

 

[bdzjlz]

Contact Best Fittings in the UK. Normally three day service. They will have anything you want.

 

[Crosfire]

It's like the Old Discovery rifles. Add a Moderator and you had issues.
Back then I changed the Male part on the Rifle to an angled part.
I'd bet with some research you could get the fittings to angle the fitting.

Like this?