My verdict on the FX Crown Continuum

[stormy]

mtnGhost, that Loctite which you used is for metal to metal thread contact. It can eat plastic as it is not meant to be used like that.

 

[mtnGhost]

mtnGhost, that Loctite which you used is for metal to metal thread contact. It can eat plastic as it is not meant to be used like that.

No need for lectures, use what you want on your hardware and I'll use what I know works on mine

 

[Brad980]

@mtnghost that's alright man, was just super curious as I got a synthetic crown with a 600mm barrel, regulator came in at 130 bar. I'm very impressed with it's performance and adjustability lol it's hard to leave on one setting. Reason I asked is because it's pushing the 18.13 grains at 985 fps and the hybrids 22 grains at 880 fps average at Max but on .177/.22 and hammer 5 it's still pushing the 18.13 at 949 avg yet on airgun depot with the 700mm on .177/.22 and hammer 5 theirs was pushing 901 average. Did no hammer adjustment to the screw nor reg.

 

[douger]

my 380mm is pushing 16 gr at 930 / reg at 140 bar /25/30 settings and power wheel on 4 hammer spring is at 18mm or there about