Still a work in progress but having high hopes! came up with this idea about 2 hours ago while shopping for eagle vision lol
So basically the arm is a noga cine arm with impact clamp on one end and 1/4 on the other, attached to a quick release plate and attached to camera
I might run nato instead of clamp and will use a smaller quick release plate. Need to move the prism forward and then might’ve able to shoulder the gun and look directly into camera in a normal shooting position.
Will report back as I tweak it further!
Final set up and video here
www.airgunnation.com
So basically the arm is a noga cine arm with impact clamp on one end and 1/4 on the other, attached to a quick release plate and attached to camera
I might run nato instead of clamp and will use a smaller quick release plate. Need to move the prism forward and then might’ve able to shoulder the gun and look directly into camera in a normal shooting position.
Will report back as I tweak it further!
Final set up and video here
First blood with the home made scope cam
Came up with this idea while I was shopping for eagle vision lol. It’s only 3 parts: a clamp, arm, and quick release. The camera is Panasonic lx100 mark1 Manual focus I set before I lined up mr furry so it’s a little back focus. Next time I will stop down to f/5.6, and try to focus once I...
www.airgunnation.com Last edited:
