This airgun creatred by me.Project almost done.
Videos.Thx for watching.
https://youtu.be/0jcJU19dNlo
https://youtu.be/JHMCoLPKc2I
Videos.Thx for watching.
https://youtu.be/0jcJU19dNlo
https://youtu.be/JHMCoLPKc2I
Quite impressed how it operates. What was the most difficult part to make? How reliable is the magazine feed? How many shots per one tank fill?
The development took a long time, when it was difficult for me to say what was the most tad. There are a lot of things that are not stadnart. One of the difficulties was that all pellets with a rate of fire reaching 1200 were poured out with the same initial speed. 281-279-282-282-279 ..... and not 280-275-270 --- 250-250 .... magazine works very well. It's not even expected. Since the trunk is short only 350 mm and the speed is 280 0.68 then the number of shots from one tank is not very large 60-80. But there is a classic economical valve. By the way, the power can still be increased. The capacity of the valve and the rest is enough for the next caliber. I made a reserve just in case.
So this is a true full auto - you squeeze the trigger and the pellets runs out rapidly. Yes?
Or, is it possible to pull the trigger and get one shot at a time, like a half auto? I think that would be a preferable option for a scope gun.
was just batting an idea around in another thread and this looks like a place that would be good for it. Remote tethered bottle, like paint ballers. I assume you burn through the air quick with that full auto, if you were to remotely tether a bottle on a pack, you could even remove the cylinder from the gun reducing its weight and increasing it's shot count.
Thanks Zonder, that’s definitely amazing, and it looks accurate too. Please keep posting about this. I also really like the stock and the overall uncluttered look, nice work! I have a modified Drozd that’s really fun, but your rifle is way more interesting. Thanks for sharing this!