It sounds like im shooting a .410 guage haha. I want to find a solution for that as the neighbors have shared that the sound is very loud. I am struggling to find a silencer for my gun mainly due to the space between the barrel and the air cylinder being very tight. Has anyone got any suggestion to keep the sound levels quite? I measured with the caliper and i think i can fit something with around 24mm or 25mm in diameter.
My Gun is a bit LOUD...
- Thread starter MOE.LB
- Start date
could machine a extension.. screw on the extension and then whatever moderator you want.
I can easily do it assuming you have 1/2"x 20 threads.. just PM me the diameter and length of extension you need..I even have a spare Donny FL shogun moderator if you need one, I'll give you a very good price.. you didn't happen to mention caliber though. I have everything in the shop to make it happen..
id make the adapter free and sell you the Donny FL shogun for $150 if you sent me the dementions and then a prepaid pirate ship label. if you don't want the Donny FL shogun, I could make the adapter for $45 but you'd get the adapter free with the Donny FL shogun..
the Donny FL shogun moderator will quiet a Condor turned on all the way.. the Donny FL shogun is just lightly used since November 2024
PM me
Mark
Upvote 0
Hi Mark, it's a 5,5mm But i don't live in the states so im not sure if shipping would work for me.
Upvote 0
so can you possibly convert to inches.. like with a caliper set to decimal? is it 1/2" by 20 threads?
so I don't know what the deal would be as far as shipping a moderator, but if make sure the threads are correct, how long the threads are.. and how long until the end of the air tube because you'll want the male threads past it.. I can make it out of brass and try to mail just the adapter unless you find out the moderator is ok to ship..I can make it out of Cold roll steel or it's faster and easier to use brass..
then I could mail it maybe as a gift, and if it works out you can mail what you think it's worth..at least enough to cover postage.. then you can put on whatever moderator you choose..
let me know if any of this sounds workable.. I can't imagine a terrif or anything wrong with just a small brass adapter the size of a small bolt..
I'd love to pass on the moderator but I assume that could easily make it complicated..
if I have to declare value, could just guess maybe $5 ? if you can't send anything it's fine..
just get me the dementions.. length of thread on the gun.. how much smooth area to pass the muzzle and then I'll make the make thread says the gun so you can use the same thread protector..
oh and I'll need the out diameter to clear the air tube..
I can make it all smooth or knurle it to match the knurling on the threaded end cap protector so it's easy to install and remove..
let me know what you want.. I don't think sending a small part the size of a small bolt should be a problem..
Mark
so I don't know what the deal would be as far as shipping a moderator, but if make sure the threads are correct, how long the threads are.. and how long until the end of the air tube because you'll want the male threads past it.. I can make it out of brass and try to mail just the adapter unless you find out the moderator is ok to ship..I can make it out of Cold roll steel or it's faster and easier to use brass..
then I could mail it maybe as a gift, and if it works out you can mail what you think it's worth..at least enough to cover postage.. then you can put on whatever moderator you choose..
let me know if any of this sounds workable.. I can't imagine a terrif or anything wrong with just a small brass adapter the size of a small bolt..
I'd love to pass on the moderator but I assume that could easily make it complicated..
if I have to declare value, could just guess maybe $5 ? if you can't send anything it's fine..
just get me the dementions.. length of thread on the gun.. how much smooth area to pass the muzzle and then I'll make the make thread says the gun so you can use the same thread protector..
oh and I'll need the out diameter to clear the air tube..
I can make it all smooth or knurle it to match the knurling on the threaded end cap protector so it's easy to install and remove..
let me know what you want.. I don't think sending a small part the size of a small bolt should be a problem..
Mark
Upvote 0
I take it 5.5 mm. =22 caliber?
that's fine,if so I'll just need the outside dementions.. maybe you can do a rough drawing so I know exactly where each measurements go.
Mark
Upvote 0