My adventure using a RAW HM1000X for NRL22
- Thread starter scotton
- Start date
Yeah, I used to put up with that BB gun poop all the time. I had an HM1000x built my Martin for me in .177 cal just to satisfy my curiosity whether it could compete at 100 yards with all the fancy 30 cal rifles. It did. You should go on Snipers Hide and post this on the Rimfire section. I've been poking at these rimfire guys about airguns beating rimfires. It started out against me , but some are now beginning to pay attention.
Upvote 0
I hadn't thought of that, I've been cleaning the barrel every 150 shots and/or before every match. Maybe I'll leave it dirty for tomorrow's match and see how it does.
Upvote 0
Snipers Hide is a little bit much for me. You know what they say about opinions and a--holes, and The Hide has plenty of both. I prefer to show people the benefits of air guns face to face. It's very special to watch someone with a Vudoo or Rim-X suffer their 3rd jam of the match and quietly point out that your air rifle has never jammed. Or to listen to guys figuring out their wind call and say "Yeah, I'll need to take 30% off of that".
Hopefully with my dope figured out I'll become even more insufferable to my buddies.
Upvote 0
Sounds like your buddies need to learn how to tune a mag! Lol, I have a Vudoo and also shoot rimfire in NRL22 / PRS. I've been fortunate not to have any feeding issues. But it's quite interesting to shoot both, learn both, fight with different problems in both... I appreciate things in both worlds.
Upvote 0
Thanks for these posts. If I know why I missed a shot, then I'm humbled, but if I don't undestand why I missed then it is frustrating. Your posts promise me humility.
Upvote 0
Quick double match report
The PRS match Saturday went well. My Midpack Domination continues!
The NRL22 match today felt a little meh. I came in 4th, but I missed some easy shots.
I'm not going to break down each stage, here's a high-level analysis:
I checked with MPA about the chassis that I ordered a month ago. When I ordered the chassis the website said 4-6 weeks lead time. MPA responded to my email saying that it's 10-12 weeks lead time. Then they updated the website to say 10-12 weeks. So I'm disappointed and feeling a little gas lit, but since they are the only game in town for the RAW, I have to just wait and pretend that I don't mind when a company tacks two months onto their delivery time while making it seem like I should have expected this.
I also asked Shooters Global about the Pulse Pro I ordered. Supposedly they are shipping this week. And they sent me a nice email asking me to review the Pulse Pro. I pointed out to them that I would prefer to review it AFTER I receive it. That's just how I roll.
Lastly, I ordered another Tuxing 6.8L bottle from Amazon since I've been happy with the one I bought a few months ago. The bottle arrived without the valve or hose, just the bare bottle. I returned it and I'll try again.
The PRS match Saturday went well. My Midpack Domination continues!
The NRL22 match today felt a little meh. I came in 4th, but I missed some easy shots.
I'm not going to break down each stage, here's a high-level analysis:
- Elevation was spot on since setting DSF values in the Kestrel.
- Wind is still the biggest points leak. I'm getting more confident with the wind values in the Kestrel but I had two stages yesterday and one today that got wrecked by wind shifts. My focus right now is to come up with strategies to help deal with wind shifts and lulls. I think this is the main thing that separates top tier shooters from mid pack shooters.
- When I have a bad stage, it's dropping 4 or 5 points, not 9 or 10 points. This is progress, but I need blow up stages to mean dropping 2 or 3 points and I need to clean more stages. The match winner yesterday averaged 10 hits per stage, I averaged 7.9. Today the match winner averaged 9.48 and I averaged 8.48.
- I think the sweet spot for this barrel is about 100 to 250 shots. It shot real well yesterday with about 150 rounds on it, but groups weren't great this morning when sighting in. I ran 3 wet patches and 1 dry patch through it before the match to get it clean-ish but not spotless. More study needed on this.
I checked with MPA about the chassis that I ordered a month ago. When I ordered the chassis the website said 4-6 weeks lead time. MPA responded to my email saying that it's 10-12 weeks lead time. Then they updated the website to say 10-12 weeks. So I'm disappointed and feeling a little gas lit, but since they are the only game in town for the RAW, I have to just wait and pretend that I don't mind when a company tacks two months onto their delivery time while making it seem like I should have expected this.
I also asked Shooters Global about the Pulse Pro I ordered. Supposedly they are shipping this week. And they sent me a nice email asking me to review the Pulse Pro. I pointed out to them that I would prefer to review it AFTER I receive it. That's just how I roll.
Lastly, I ordered another Tuxing 6.8L bottle from Amazon since I've been happy with the one I bought a few months ago. The bottle arrived without the valve or hose, just the bare bottle. I returned it and I'll try again.
Upvote 0