Benjamin Muting the Marauder (How to make the quietest Marauder possible)

[Sdrawkcabnipyt]

I modified the factory depinger in my Marauder. It looks like a piece of rubber hose.
I drilled 3 holes on four sides of the depinger. I think that it had 8 grooves on the outside of it. I then stitched some Dacron fishing line to make the inside of it look like a fish net.
It works well.

Hunter

That’s really creative!

 

[3Crows]

I use the one inch brush from this kit or similar from Ace. I cut the handle end off to shorten it and then bend it over to make a hook or loop so that I can grab it and pull it out for maintenance.

 

[Sdrawkcabnipyt]

I use the one inch brush from this kit or similar from Ace. I cut the handle end off to shorten it and then bend it over to make a hook or loop so that I can grab it and pull it out for maintenance.

View attachment 568883

I ended up removing my depinger after I installed the huma regulator. I read it wouldn’t make much difference at that point, what’s your experience?