MOUNTING SCOPE ON KRAL 22

[Guest]

I am having difficulty mounting my Aztec Emerald on my new Kral 22. I have moved the scope all the way forward on the rail but I still need to move it forward or me back at least and inch.
I have looked at the mountings on some of the Kral rifles on youtube and no one seems as far forward as I am .
Has anyone had this problem. FIRSTSHIRT

 

[JimNM]

Can you post a photo? We may be able to help you more easily if we can envision your problem.

 

[Matt247365]

Is it a bullpup? If so, I wonder if you could rotate the scope rail 180 deg.

Matt

 

[Grin_Reaver]

I have one word for you. Cantilever mounts.

some can move the scope forward more than others

 

[alpine84]

Cant you move the scope in the scope rings? 

 

[Grin_Reaver]

If you are the adventurous type you could try something like this(both rings on same side)

 

[John "spysir" Blount]

Yup, 2 words Cantilever mount .
If a rail the BKL is the best money you can spend on rings/mounts. I have used their cantilever munts even on a springer, outstanding and always centered.

If weaver I'm sure UTG or many others make cantilever mounts for you.

Post up a picture of what you end up using.

John

 

[JimNM]

Medium rings on a Hawke scope. Nothing fancy, worked first try.

 

[Scotchmo]

Some versions of the Puncher Breaker had the scope scope rail extending forward. Can you reverse the existing rail? Or swap it out for the older style?

 

[Guest]

I was able to put a recoil pad on the stock to push my body back an inch. Fortunately that was enough to get the correct eye relief from the scope. Thanks everyone for your input. I was about ready to go the the extended mount appeared to be the thing that would work.
The mounts are the FX adjustable mounts and my shots at 35 yards I need to come up about 3 inches and left about 2 1/2. As you know that will use a lot of clicks on the turrets . The vertical will be no problem but the windage it taking it right close to the max.
How do you adjust for windage?

p.s. I am still trying to figure out how to upload some .pictures. 

 

[Guest]

 

[JimNM]

Swap the scope ring mounts front and back, 
turn the mounts 180 on the rail, 
last resort would be to shim the rings.

 

[Guest]

FYI everyone. the rail on the Kral cannot be reversed. I bought a SLIP ON RECOIL PAD and it worked out the problem. I have the FX adjustable mounts and that is working out fine.
I have heard some info on sighting in (j25 yds). When adjusting the windage, turn the power all the way down put in the minimum clicks and then turn the power back up to what you intend to use. Allegedly it takes up less clicks. If anyone has tried this, let me know. 

'Firstshirt. 

 

[JimNM]

Zoom level will not change the mechanical effect of turning knobs. I am not sure of how the method posted would have any different effect. If it make sense to you, gopher it.