More TX200 fun

I've been wanting to shoot my 200 but the weather hasn't been cooperating, until yesterday. It was a beautiful, warm, and for the most part still morning. The target was set at 30 yards, same distance as one of my bluebird houses that sparrows want to make theirs. I wanted to revisit shooting pellets that were lubed the furniture polish Airshot recommended. I started with a few groups of non lubed JSB 10.65, then to the same pellet lubed. After about 30 or so rounds the groups started tightening up. I probably shot 100-120 of the lubed pellets and remembered that I had a tin of AA 8.4's that I had tried last year.



This rifle has shown a preference for heavier pellets whether it be JSB or H&N and it also likes a 4.51mm head size best, from reading here it seems most guys like a 4.52 or 4.53 head size best. I was pleasantly surprised how well the 8.4's shot. On the target below I started with the zero for the 10.65 and slowly made the moves to zero the 8.4's. The groups aren't great by any means, but at least the rifle and I are getting more acquainted and improving. The best relationships take time! LOL



While I was set I chronographed it again, at 1 yard and also 17 yards, I didn't feel like dragging out another extension cord needed to get to 25 yards.

At the muzzle.

H.-913

L.-900

Avg.-904

E.S.-13

S.D.-3



IMG_5369.1646324644.jpg

 
  • Like
Reactions: drpietrzak
More important than lube is weighting pellet's and separating into groups by weight

there are some huge weight difference in pellets that will make a difference at longer ranges

When I shot CP lites, weight was an issue as well as the JSB pellets. When I switched over to AA pellets, the weight has been much more consistant, so much so that I test a dozen or so from each tin and if they are good, I dont bother weighing the others. As far as the lube goes....I was using Sainsburys from the UK for many years, but with shipping costs skyrocketing, I found another beeswax product here in the US. The Amish furniture makers that made all my furniture put me onto the beeswax product sold at " Annies Craft Store". They have it online for about 12 bucks a can andvit goes a long way....a can lasts me for over 5 years or more!!
 
Old World Formula Furniture Polish, made with beeswax.

Also great on your stock !!! Beeswax is a natural water proofer so spray the ibside of your stock to prevent swelling and shrinking from moisture. Beeswax can also be used on metal and blued steel to prevent corrosion and remove finger prints. No smelly residue on your fingers and it is completely safe for any seals that might come in contact with it. 
 
Yep that is the stuff.....makes a great pellet lube!!!! Especially in springers, cant say for sure in pcp's as I have no experience with them, however I do know of a number of pcp shooters that do use it. Once you start using it as a pellet lube, your barrel will be much easier to clean as there will be no lead fouling and no crud build up unless your shooting really dirty pellets and if you are....there is no cure other than washing the crud off. I have found the AA pellets to be very clean with no noticible lead swarf and far less deformed pellets. I have used this stuff for over 30 years in all my springers even my 10 meter match rifle with marked improvement in accuracy.