I'm sure it's bitter sweet for many springer guys but I'm really glad to read this painfully honest thread.
Upvote 0
HW/Weihrauch More bad news about my new to me Hw50.
- Thread starter Mycapt65
- Start date
Agreed, Weihrauchs QC (or standards) have always been poor. This is a before and after of the cylinder plug in an early 80's HW35 I restored-
Apart from it being kinder on the seal, cleaning up the tool marks (albeit very fractionally increasing swept volume/ reducing lost volume) increased power by 0.6fpe too.....
Apart from it being kinder on the seal, cleaning up the tool marks (albeit very fractionally increasing swept volume/ reducing lost volume) increased power by 0.6fpe too.....
Upvote 0
Well worth buying (or making one as I did) if you're in to the older 35's, have used it a few times to clean the cylinder plug after resolving the pourous braze issue too (using loctite)i bought a similar device to do exactly that… that came out amazingly well … great job
Upvote 0
This barrels been off as well. This is not a factory peen on this cocking arm rivet. The more you look the more you find. I've been stung about an equal times as not on used guns.
Upvote 0
No biggie I'll get it all squared away. I just wish it went easier.
Thanks for the call
Be well
Ron
Upvote 0