Hi I have just purchased a Brocock bantam HR I have notice some moisture building up near the end of the barrel at the breach end. Could someone tell me if this normal all is something I should be worried about.
Moisture on barrel Breach end Brocock bantam HR
- Thread starter Kamanthi-
- Start date
Perfectly normal if You shoot in moist conditions and if humidity is high in air. No worry.
Upvote 0
I live in s.Florida very high humidity and have never experienced that i wounder if your fill device has dry air.
Upvote 0
Usually the "end of the barrel" is the muzzle, but you're saying the breech, which is where the pellet is loaded. Does it build up outside of the barrel or do you notice it inside as a pellet is loaded? As suggested, your air supply sounds like it has some moisture issues.
Upvote 0
Perfectly normal. My Wildcat and my Cricket both have moisture build-up anytime I shoot. It's my breath exhausting on to the regulator area
Upvote 0
It’s where the barrel screws on I have noticed moisture left and right side. This only when I’m Shooting it.
Upvote 0
Hi it’s where the barrel screws on. I’ve noticed when I’m at the range moisture builds up on the left and right side where the shroud and barrel screw on.
Upvote 0
Hi thanks for getting back to me. The moisture Come from the left and right side where the shroud and barrel screws. So you are saying this is normal. What causes this could you explain please.
Upvote 0