• The AGN App is ready! Search "Airgun Nation" in your App store. To compliment this new tech we've assigned the "Threads" Feed & "Dark" Mode. To revert back click HERE.

Tuning moding a 600mm fx dream line barrle and shroude need a little info on a 380mm

Jump to latest Follow Reply
G

gizmo1974

Member
May 5, 2018
870
101
Tennessee, United States
guys i got a 600mm barrle with barrle shroude and the factory shroude the worm nut thats half inch 1/2 20 was stuck had to mod shroude and heat it to get it out what i am needing to know is the length of the 380mm barrle this 600mm i got is 30 cal i going to cut barrle down to 380mm and cut the first shroude down re thread it and use a carbon sleeve over it all the 600mm barrle its self mesures 23 9/15 that is 23.562 in inches and in mm it is 598.487 in mm if any one has the 380 mm barrle from 177 to 30 cal in the dream line i would like to know exzatly what the 380mm mesures out to so i can cut mine to match
 
i called the guys at utah air guns where both my dream lines was got from super good guys they mesured me a 380mm barrle and its exzatly 380mm like 14.960 in inchs i did a comparson i may be off some what but seams like fx is right on the money as far as lengths here a chart i came up with may be off some 380mm=14.960 395mm=15.551 500mm=19.685 600mm=23.622 700mm=27.559 800mm=31.496 i may be off but i was all most right on the money for the 380mm i did mesure my 600mm barrle it was 23 9/16 =598.487 in mm so i was close
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu