Moderator
- Thread starter JAYj
- Start date
well that might be a tough nut to crack, it appears the it is 12mm - unknown thread pitch I would guess 1.0 but 12mm has 4 common thread pitches
and I'm assuming your inquiring about the pistol that has the thread cap on it
I have in the last few month been chasing my tail to solve adapter needs so I have been down some rabbit hole
now they make a fake modulator might be able to crack it open and fill it
Magic 9 Design in the UK could make an adapter for you but it would not be cheap and you would have to know the thread size
so not much help
so still looking and found this but first the Diana Chase has the barrel threaded in 10mm-1.0 and those LDC can be found on Ebay and if this has the right type on thread this could be you adapter of course the center would have to be opened up to let say 1/4 inch-6.350mm the threads are more then like UNF and any adapter fo brakes or other could be something else but the same thread size not all threads are the same in the same size
https://www.amazon.com/Fitting-Metric-M12X1-Female-Adapter/dp/B07FRTKRYJ
just an example
but there are some unknowns and that's why i have a large box of things that didn't work
the bottom line is this can be done but will it make any sense if the cost is too high
still looking
and I'm assuming your inquiring about the pistol that has the thread cap on it
I have in the last few month been chasing my tail to solve adapter needs so I have been down some rabbit hole
now they make a fake modulator might be able to crack it open and fill it
Magic 9 Design in the UK could make an adapter for you but it would not be cheap and you would have to know the thread size
so not much help
so still looking and found this but first the Diana Chase has the barrel threaded in 10mm-1.0 and those LDC can be found on Ebay and if this has the right type on thread this could be you adapter of course the center would have to be opened up to let say 1/4 inch-6.350mm the threads are more then like UNF and any adapter fo brakes or other could be something else but the same thread size not all threads are the same in the same size
https://www.amazon.com/Fitting-Metric-M12X1-Female-Adapter/dp/B07FRTKRYJ
just an example
but there are some unknowns and that's why i have a large box of things that didn't work
the bottom line is this can be done but will it make any sense if the cost is too high
still looking
Upvote 0
I bought a custom mod from Poland a few months back. It is VERY well constructed and has exceeded my expectations with it's "moderating" performance. The guy that makes them can do almost any barrel diameter or thread pitch. From the time of order until delivery takes about 3 weeks. PM me if you need more info.
PT
PT
Upvote 0
I thought there was a dealer that had an ad on here, but cant (senile) remember the name of the advertiser .
Upvote 0