Moderator/suppressor for Quackenbush .357/9mm pistol ?

[Gsyme]

Not sure where to being looking for something that would work on this gun. Maybe it doesn't exist. It's so loud I am doubtful about how possible it is to quiet it down but would like to try. It's quite a bit louder than a rimfire .22 at the moment.

This is a completely new area for me. Have never purchased or even used a suppressor before. What do I look for, where to begin? I notice that the barrel doesn't stick out past the fill nipple very far either and am wondering if that would get in the way of installing a suppresor.

Thanks for any more tips in advance.

- G

 

[crittahitta]

Call donnyfl. He can make an adapter for you.

 

[Gsyme]

Great. Thanks. I will check him out.

- G

 

[John "spysir" Blount]

 Some pretty pictures and such on this page.

https://www.airgunnation.com/topic/new-quackenbush-outlaw-pistol/

Actual Barrel dia? No shortage of options out there.

John

 

[Gsyme]

The barrel diameter is 15/32" or extremely close to that. I don't have calipers. That is using a tape measure. I need to get some calipers for this kind of thing.

- G

 

[Bowhunter73]

In link spysir posted of my Quackenbush 25 it came with the 1/2x20 adapter on it you might try calling Dennis and see if he has a adapter to fit the 9mm barrel.

 

[JP007]

Neil Clague ldc makes the best LDC for DAQ airguns.