Did anyone out there install a regulator on a .25 FX Bobcat MK1? Looking to find your shot count and ES.
AZBOBCATYou can use the FX reg the only difference is you wouldn't need the fill at the back of stock, the standard gauge would read reg pressure and the fill would be at the front it would also get rid of the possible leaks from the extra seals and the tubing.
AZBOBCATThe longer air tube I want has the fill port at the front of the tube.I can cap off the old fill port and leave the gauge for reg pressure. If hsnmz your friend needs to increase reg pressure so it will increase fps. It is a balancing act between reg pressure and hammer spring a d hammer weight to get what you want.
Thanks, Can you please point out which nut do I need to back out, sorry for my not getting it."AZBOBCAT"Hsnmz when you have the reg out decreasing the spring tension increases reg pressure which increases velocity. Backing the nut off in very small increments till you have it where you want it.