Mk2 impact 25 changed to a 30

[Airgunmann]

I want to try out a noe mold for pellets in 30 cal so I swapped out barrel to 600 mm from a 700 mm I removed the block and ported it and the valve and used a huma transfer port swapped out to a tungsten hammer I've also installed a 720 plenum on it the mold is dropping 51 gr pellets at 155 bar I'm running 920 fps with the valve control set just above 3rd line

 

[TRIPP]

I have had excellent results with the NOE 300-59-RF-BZ5 Magnum Pellet. Using an RCBS PRO MELT 2, temp at about 780, no wrinkles, no voids. NOE molds are awesome, but I just love slugs as they do so much better in the wind here in Nebraska, lol, I love the power of the .30!

 

[jking]

Good looking gun there. Which mold did you get. I'm casting the 46gr hunters and for a cast pellet they shoot great. Makes a 30cal way more economical to shoot.