AEA Megalodon loosing air

[pcponly]

The inevitable happened with an aea guns
Im all of a sudden developing a small leak on my Megalodon over a period of a week or so I will leave it at full charge and come back to be 1000 psi lower I've sprayed the entire gun with soapy water and no bubbles anywhere so it must be internally any ideas ? Thank you

 

[ctshooter]

Have you checked if the air is leaking down the barrel through the valve? I've had the valve break on AEA guns before. If it's fast enough you could hear it - if not remove any shroud and put a balloon directly over the bare muzzle.

 

[pcponly]

Have you checked if the air is leaking down the barrel through the valve? I've had the valve break on AEA guns before. If it's fast enough you could hear it - if not remove any shroud and put a balloon directly over the bare muzzle.

Thank you I will try that. Is defenetlya slow leak....you in Connecticut?

 

[Dstrac]

The inevitable happened with an aea guns
Im all of a sudden developing a small leak on my Megalodon over a period of a week or so I will leave it at full charge and come back to be 1000 psi lower I've sprayed the entire gun with soapy water and no bubbles anywhere so it must be internally any ideas ? Thank you

My aea sf 30 and my hp 50 both used to leak down to 4000psi over a few days or so. A few months ago I put a few drops of silicone oil inside the fill probe then filled with air. They both now hold 4500psi, it was an instant fix. I read about people doing it to their sf on here. It's worth a try. O rings can dry and shrink. Check valves can get stuck.

 

[pcponly]

My aea sf 30 and my hp 50 both used to leak down to 4000psi over a few days or so. A few months ago I put a few drops of silicone oil inside the fill probe then filled with air. They both now hold 4500psi, it was an instant fix. I read about people doing it to their sf on here. It's worth a try. O rings can dry and shrink. Check valves can get stuck.

Thank you ill try that i have airgun oil