Megalodon 58 cal….can it be upgraded?

[Stealthv8]

Hey guys. Loving the megalodon and learned a lot about its pros and cons from here and YouTube. My question is can the megalodon be upgraded for more power? Or even add a regulator? How much more can you do upgrading the airgun or is it at its max potential? Has anyone even attempted to do so haha. Thanks for hearing me out and look forward to your answers.

 

[Ratzy]

To regulate a big bore you need a big plenum. To calculate plenum
3 * (length * pi * radius)
Assume 22 inch .58 barrel
3 * (22 * 3.14 * 0.29)
3 * 5.81 (95CC)

A plenum of 285CC would be about the minimum.
Bottle -> Reg -> Plenum -> Gun

It does not look like you can put a regulator on a Megladon unless it can use the regulator for Terminator.

But then where do you install the plenum.

 

[markhooper]

as far as more power unless you want to risk your health, that gun/brand is past it's Max potential from the factory.. I've seen guys who don't abuse it have them blow up the loading port area..I don't know could have been a missed oversized projectile but I don't like explosion let alone that close to me.
stay safe
Mark

 

[Gerry52]

Upgrade to what? 105mm howitzer?

 

[Stealthv8]

as far as more power unless you want to risk your health, that gun/brand is past it's Max potential from the factory.. I've seen guys who don't abuse it have them blow up the loading port area..I don't know could have been a missed oversized projectile but I don't like explosion let alone that close to me.
stay safe
Mark

I was loading up some hollow points the other day and it was just way to much of a struggle to put them in i will usually test out the mag put punching them out with a metal rod to see if it comes out normal. That’s scary I could only imagine the damage of those just breaking right in your face. Thanks for the info I just figured I’d ask and see if there was more that can be done power wise like a power plenum or tuning or spring etc

 

[Stealthv8]

Upgrade to what? 105mm howitzer?

 

[markhooper]

I was loading up some hollow points the other day and it was just way to much of a struggle to put them in i will usually test out the mag put punching them out with a metal rod to see if it comes out normal. That’s scary I could only imagine the damage of those just breaking right in your face. Thanks for the info I just figured I’d ask and see if there was more that can be done power wise like a power plenum or tuning or spring etc

I actually saw the video it's on YouTube by a review person that is actually on the forum..
very scary
Mark