FX Maverick 1st Regulator Bypass

[KodiakJac]

Does anyone know for certain if the Saber Tactical FX Impact M3 First Regulator Bypass ST0039 will not work with the Maverick in bypassing the 1st regulator?

In checking the FX schematics for the 1st regulator on the Impact M3 and the Maverick, I'm seeing the same part numbers for all parts with the word "regulator" as part of the description...

Impact M3
19695 Regulator Screw Impact
19697-1 Regulator house
19696 Regulator piston (long) (May 2017>)

Maverick
19695 Regulator Screw
19697-1 Regulator house
19696 Regulator rod

It would seem that based on the parts above, the Saber Tactical 1st Regulator Bypass would also work on the Maverick. But are there other considerations that would make it incompatible with the Maverick?

Thanks!

 

[Stubbers]

Does anyone know for certain if the Saber Tactical FX Impact M3 First Regulator Bypass ST0039 will not work with the Maverick in bypassing the 1st regulator?

In checking the FX schematics for the 1st regulator on the Impact M3 and the Maverick, I'm seeing the same part numbers for all parts with the word "regulator" as part of the description...

Impact M3
19695 Regulator Screw Impact
19697-1 Regulator house
19696 Regulator piston (long) (May 2017>)

Maverick
19695 Regulator Screw
19697-1 Regulator house
19696 Regulator rod

It would seem that based on the parts above, the Saber Tactical 1st Regulator Bypass would also work on the Maverick. But are there other considerations that would make it incompatible with the Maverick?

Thanks!

A quick call to UA (they handle FX warranty/repair now) would likely get a more immediate answer, although I can say with 95% confidence that you're fine interchanging the two guns regulator components. GL

-Matt

 

[KodiakJac]

Cross post from another thread on Airgun Nation...

"The first reg on an M3 is housed in the bottle adapter. The “delete” kit for an M3 is a replacement bottle adapter without reg.
The mav has the regulator in the front reg housing similar to a dreamline. This will not work with the M3 part."

Is a single reg maverick a possibility?

 

[Trucker3573]

That makes sense. If you want to take the first reg out of line I would just open the adjustment screw flush and you will have a single regulated Maverick.

 

[sniper maverick]

What if the filling valve will be instead of the first reg and instead of the filling valve will be another gauge or it can be a bolt with am o ring to cover the hole or it can go the other way around.