Has anyone added any limbsaver or similar products on the outer surfaces of their marauder to assist the factory depinger?
Marauder depinger
- Thread starter OkieMikeA
- Start date
Don’t think anyone can deping a gun from outside.
here is a good depinger
https://hillairgun.com/product/hill-airgun-pcp-depingers/
or you can try stuff a bottle brush into the air tube.
here is a good depinger
https://hillairgun.com/product/hill-airgun-pcp-depingers/
or you can try stuff a bottle brush into the air tube.
Upvote 0
The ping is completely internal. It is a sound wave that travels through the tank from the valve and reverberates. Nothing you attach to the outside is going to interrupt it. A set of earplugs is the only thing external to your rifle that would make a difference.
The factory rubber ring “depinger “ in the marauder is worthless. It’s just taking up airspace in your tube.
You have options.... Make a bottle brush depinger yourself which is cheap and works fine, or buy one of Tim Hills marauder depingers. I’m not aware of anyone else making them at this time. Tim’s are fantastic though. There’s also the pvc tube depinger that you could do, but keep in mind the more material you stuff in the tube the less shots per fill you’ll get due to the reduced air capacity. I’ve done the bottle brush and have bought a couple of Tim’s from hillairgun. I much prefer Tim’s.
The factory rubber ring “depinger “ in the marauder is worthless. It’s just taking up airspace in your tube.
You have options.... Make a bottle brush depinger yourself which is cheap and works fine, or buy one of Tim Hills marauder depingers. I’m not aware of anyone else making them at this time. Tim’s are fantastic though. There’s also the pvc tube depinger that you could do, but keep in mind the more material you stuff in the tube the less shots per fill you’ll get due to the reduced air capacity. I’ve done the bottle brush and have bought a couple of Tim’s from hillairgun. I much prefer Tim’s.
Upvote 0
all you need is a moderator if you want it quieter .. but i agree with above, i got my first Hill depinger for the bulldog and was entirely impressed, so got one for the mrod to .. all you need ... wouldnt fart around with the rubber insert depingers, get the Hill ....
Upvote 0
Replace your factory steel hammer striker with Hill's peek striker and the ping won't be generated in the first place. Look it up.
Edit: Take two steel hammers and hit them together face to face, just lightly, both are hardened steel and you will hear a ping. Now replace one of the hammers with a plastic faced hammer and do it again. That's the difference.
Edit: Take two steel hammers and hit them together face to face, just lightly, both are hardened steel and you will hear a ping. Now replace one of the hammers with a plastic faced hammer and do it again. That's the difference.
Upvote 0
What many used to do and I also had done was get some clear vinyl tubing to place in the air tube at about the half way point. Just get a large piece and cut it to fit. Also only needs to be about an inch long. You will not effect your shot count.
Upvote 0
all long tube air revivor air rifles make the ping , if it bothers you you can regulate your gun and that get rid of most of that
Upvote 0