Marauder .30 coversion

[MattR1267]

Hi all,
I am looking to convert my marauder to a .30 and was wondering where i can purchase the parts or kits, and if there are any good tutorials on how to do it. thanks for the feedback.

 

[Zeringue]

I too was wanting to put a regulator in my MRod. And a double tube and make it a 30 cal. 

 

[John "spysir" Blount]

This should help:

http://www.airgunnation.com/topic/30-marauder-project-begins/

John

 

[MattR1267]

"spysir"This should help:
http://www.airgunnation.com/topic/30-marauder-project-begins/
John

Hey John,
Will it work with a .177 marauder because that is what i have, or will it only work with the .25.

 

[alex2865]

the reg wont work with the doubletube.ull have to put a bottle set up .or what im going to do.is lenthen the resivore .im puttg a 24 inch tj barrel also a huma reg.the one that fits it is a hatsan 30 reg.also ull need a mds hammer.plis a timm hill or a war vavle like mine.u should with that set up.get about 20 shots.8f 7 need more info.just pm me alex

 

[Dairyboy]

A .25 is needed as the .30 barrels are .5" OD. .177 and .22 Mrods are only .4375 or close to that.

 

[knifemaker]

As the reg rest against the plenum, which rest against the valve, I see no reason what so ever that it won't work in a dual tube. Just has to be against the valve system.

Knife