Tuning M3 how to get maximum round count

[Ninjababy]

I am fairly new to tuning and I want maximum shot count with maximum accuracy. 


should I keep high reg pressure and low hammer settings or higher/max hammer sittings with low ref pressure? 


Thanks

 

[puhlbo]

FX says in the M3 manual that the desired velocity should always be achieved with the lowest reg pressure possible. 


of course that gives you more shots as well because you can shoot your air cylinder down to ~80 bar instead of lets say 140 bar. 

 

[qball]

Best of both shot count and accuracy sweet spot is just below max HS for the reg pressure. Meaning if your HS setting 2 is 860fps, 3 is 900fps, 4 is 920, 5 is 930 the. Your sweet spot is 860fps or HS setting 2. 

 

[wWilliam]

what is HS setting?

 

[tdtran72]

Good info. Thanks

 

[mtnGhost]

what is HS setting?

Hammer Spring