Tuning M3 first reg on M2?

[scoutscope]

So if a guy could get a M3 first reg, would it be a direct replacement on an M2?

 

[dc8cappie]

No

 

[Airgunmann]

You can get a huma which u remove the bottle valve and it screws directly into the bottle and to the gun it's basically a bottle regulator I'm using one on my mk2 mines set at 150 and 110 works well and helps with creep in the second reg alot 

 

[scoutscope]

I will probably wind up taking them both apart and do some measuring. I would think that they wouldn't change the receiver and the bottle adapter if they could accomplish the changes in the new reg/bottle adapter. The huma part is definitely worth a look.

 

[scoutscope]

Well, if you guys could have better articulated why the new reg can't replace the old system, maybe I wouldn't have had to buy this M3. Simply put, the portion of the first reg that threads into the receiver is larger to accommodate the regulator. Now, since I can't upgrade the mk2, I guess I'll have to shoot this new rifle. Man, life is tough.

 

[rdtricks]

You can get a huma which u remove the bottle valve and it screws directly into the bottle and to the gun it's basically a bottle regulator I'm using one on my mk2 mines set at 150 and 110 works well and helps with creep in the second reg alot

Do you have a link to this Huma piece you speak of?

 

[scoutscope]

Did you try Huma's website? It's not to hard to find , or to find stuff once there.

 

[cmatera]

Something similar to this:

https://www.huma-air.com/400-500-CC-Bottle-Regulator