Tuning M3 .25 36.2 settings

[DrDamit]

What settings work good for a .25 NSA 36.2 hollow point? Including fps.

 

[WyoAirguns]

Also curious what others have to say for this.. 

 

[RALPHK]

This is what I run on my 700mm impact with the 36.2. Both with the superior and superior heavy with good results.

135-140 reg, max hammer, 4+ on the valve and max on wheel. Hitting around 960 give or take if memory serves. Consistently taking squirrels and rabbits from 50 to 150yrds with the superior heavy.

 

[AirEnthusiast2000]

I have shot them mostly with a 700MM Standard Superior. Will be trying a heavy with a bonded carbon liner. Mine is low reg pressure so I can put my .22 barrel in and shoot pellets also. 

Reg @110

Macro 16

Micro 3 and 3/4

Valve 5 lines out. 

Shoots moa consistently. 

 

[crewchief25]

I've had good results at 985fps. out of a 700mm Superior Heavy liner. My setting are almost exactly what Ralphk's are.

 

[8thman]

My impact mk2 25cal pp 700mm slug liner @110bar shooting the nsa 36.2 slugs @940+ max. But I mainly shoot it on min power @870-880 with just as good results as max but I get a lot more shots, and a little easier to shoot accurately with less recoil. And when out in the field I have it on max for long shots, on max it shoots a little flatter. I believe with the 720 plenum you will achieve greater speed with the same 110bar regulator setting! But I’m sure you’ll find out what your gun prefers with some simple adjustments. Good luck