Lothar Walther Barrel Needed For AEA HP SS in 14" to 18"

[martylee38]

Hello All,
Someone please point me in the right direction.
I am looking for a Lothar Walther Barrel 14 to 18 inch's long in .22 Cal for my AEA HP SS Pistol need the machine work and all done.
I have looked to do this in the past with other PCP's but could never find someone to do the work. I even wanted a FX Liner made to fit a PCP rifle I had and to no luck back then. Anyway Thank you for your time.

 

[dizzums]

around here, some gun and pawn shops have an in-house gunsmith ..

 

[RM.510bigbore]

From what i he noticed is most regular pcp rifles to do the barrel work requires a milling machine and a lathe. The amount of time on a manual milling machine with operator cost too high. A cnc machine at the factory does the job in minutes... I have a lathe and its cool for powder burners but can't do most airgun barrels. I'm sure some more experienced members will chime in

 

[cmatera]

[email protected]
He put a LW polygonal barrel on an Artemis P15 for me. I'd write and ask him.