LOOKING for testers for a 45 grains .25 pellet design

[darkcharisma]

I am looking for 80FPE guns and above to drive my 45 grains 25 cal pellets above 900fps for some accuracy data. if you have such guns, i would like to send you a few pellets to test out at 50 yards or 100 yards. Please let me know via pm by providing an address, your gun model, barrel twist rate and FPE setting (minimum 80FPE). I am also looking for FX Impact or Crown owners with higher output settings to test these pellets out. 


What I will need to know: 

1. your gun model, barrel length and twist rate, and your current FPE.
2. your shooting data with provided pellets. Recorded speed in FPS and group sizes with 5 shot intervals for 50 or 100 yards. 
3. Results need to be posted here with snapshots of the target

What you will need.

1. A chronograph
2. a shooting range or backyard with minimum 50 yards
3. Time! Yes, time. I want slow and careful shot placements for accuracy data. Take your time to take that shot
4. (optional) scope cam, any type will do as long as you can capture the pellet in flight to target, I want to see if there is any spiraling. You can also report to me if you see spiraling, but i prefer solid data.

Thank you very much. 
these pellets will fit a marauder magazine, length=0.425"

 

[jwrabbit123]

Hi I have been making pellets and slugs for 10 yrs , in 22 , to .30 cal not .308 , I have used a corbin swag machine and dies , and custom molds , ect , I have had some great performance with slugs , I have a few molds for .25 caliber pellets maybe 4 or 5 molds, and mine are fair not as good as JSB ,but hit much harder . Im a hunter . however My slugs rock , I have went threw many designs to get what works for me , I have a shooting range from 20 to 200 yards where I do all my testing , I would be glad to try them and or send you some of mine if you want , can I have some specifics ? such as well BHN of lead , BC or any data you have , your skirt look like about .025 with doesn't matter due to a filled cup , so this strengthens the skirt like a slug , The solid ones I had tested I had .00156 difference between head and skirt , with a BC of .069 using 6BHN @670f quenched undersized naturally , head .300 \, I see a line you casting these correct ?

I also have a few professional grade slow motion zoom cameras for scopes and a set up to go on my razor 27x65x85 to check flight in different yardages same with multiple chrons for BC and seeing when things destabilize

I found mine shot better at say 960 but when slowed down I think they showed sings of destabilizing 

HI I have a few 25 calibers , R-5 ED-GUN SUPER MAG UP TO 100 FPE

I have a Hatsan 25 cal ,up to 80fpe

I have a custom ,257 cal up to 230fpe ( .254 )

I have 4 different twist barrels for 25 cal

I have choked and un choked barrels I have a few chronos

I cast slugs and pellets for all calibers here is my 25 cal

pellets slugs .250 ,252-.254

36 gr 34 gr 73 gr

44 gr 47 gr 89 gr

59gr 55 gr 118 gr

127 gr

I have had slugs work great in all calibers , all small bores up to .300 I do not do big bores

I have experimented with similar filled pellets however you shape appears a bit different then mine .

LOU

 

[darkcharisma]

Update: I have fulfilled all the required participants for this pellet design. I will have .177/20/22/30/35 pellet calibers available soon and will need testing too. hope you guys can join in on this and help me out. Thank you! 



==============================