Looking for reputable barrel machinist recommendation (to cut a new crown)

[my87csx481]

I'm looking for recommendations for a machinist to cut a new crown on a Uragan 1 .25 barrel.

If you know of anyone, please provide their contact info. Thanks.

Also, if you know where I can purchase a new CZ Uragan 1 barrel in .25, that would be extremely helpful too.

 

[JimD]

How bad is the current crown? Can you polish it using a brass round head screw and some JBs? If you need a new crown, Brownells has hand tools which will cut a crown. Looks like they are about $100.

 

[nervoustrig]

Agreed, the brass screw method works nicely so my advice is give it a try before sending the barrel off. Worst case, you wasted some time. Best case, you’re up and running same day for almost free.

If you do decide to send it off, I may be able to help...

(Part 2) Does this barrel crown look ok to you?

well,the barrel went from this.......

www.airgunnation.com

 

[my87csx481]

Brass screw head method is not really possible, unless I chop off the end. I don't want to chop off the end.

The crown needs to be counter sunk, the way it is currently, without shortening the overall length of the barrel.