Looking for info on Original Condor by Airforce

[gustavocastilla]

Howdy I am new to the forum and hope I can get a bit of info on a Condor by Airforce .
My understanding is that my Condor is an early one It Came to my ownership a couple years back, I do not know much about PCP Air guns so I am posting a few photos with the hope to figure out what or how I can get it to work.
Not sure what I need other then a way to charge the bottle

 

[Berserkeley Mike]

As I understand it, there is a cap thingie that fits over the bottle, which has a foster fitting that one can connect to a pump; see here:

Reviewing the AirForce TalonSS precharged pneumatic air rifle: Part One | Blog | Pyramyd AIR

Today we're going to begin looking at an air rifle that has been in production for 24 years or so and has been modified and improved over time, but has never had a Gen 2 designation.

www.pyramydair.com

If you don't have that cap, try calling Airforce and they may still have some, or can help swap out the valve or tank for something easier to fill.
1.877.247.4867
1.817.451.8966
I hear they are very nice to talk with.

Here is a start of information on the Condor, and note there are parts 2 and 1 linked at the start of the article:

The AirForce Condor – Part 3Filling the gun | Blog | Pyramyd AIR

by B.B. Pelletier Part 1Part 2 Today, I'll discuss filling and the performance curve of the Condor. SavageSam reminded me that I promised this for Part 2, and another reader is having problems with his .177 Condor. All of these topics pertain to the same subject - how the Condor performs on a...

www.pyramydair.com

A search on that Blog (and this site) will turn up a _lot_ of information on those guns.

Enjoy!
Mike

 

[shambozzie]

You need a fill adapter. Call AirForce or Pyramid.