Looking for help with Kral Puncher Knight (nemesis)

[HDMurex]

I have a Kral Puncher Knight (nemesis) that came from the factory in .22 cal. I bought the .25 barrel/probe upgrade kit and have failed miserably at installing it. After multiple attempts it seems like I cannot ever get it "straight" ... it shoots so extremely low/right it's impossible to even try to shoot safely. Any advice on a way to fix it ... or should I post a "WTS half working kral puncher knight that comes with a pile of .22 and .25 parts"? Or is there someone here who does repairs/service that might be interested in servicing my money pit?

 

[JimNM]

Heya buddy, funny you should ask that question. I have a Puncher Nemesis (P. KNIGHT GEN 1.0), also in .25 that also throws way right and low compared to my other guns. So far low and right that none of my scopes will adjust POA (point of aim) to POI (point of impact).

My solution was to shim the scope rings using a folded piece of masking tape under the rear left side of the rear scope rings. That pushes the scope front side to the right (effectively). I was able to use that gun to compete at a couple of bench rest matches with my tape shim method.

I understand that may not work for you if you want to play caliber swap bingo on the daily. My gun is shooting about 54 FPE with a Donny Tatsu and a few minor mods. It is quiet and accurate and gets a huge number of shots on the plateau. I will be happy to chat anytime about the Knight/Nemesis.

Shoot'em good!

 

[willy]

I have the Kral night.Its a beast for bull pup.But i just got tiried of filling up the other guns.Its 25cal.Shooting 21gr.i turn the power down 1/2 and it still does it all" It shoot great" a bean can full of water at 30yard it jumps up 10' then if im luck y i blast through the bottom"I did think about getting the 22 barrel?but after hearing what you are going through im going to leave it alone"Man im not sure what to tell ya?? I got mine as a reverb. Trigger is their"its all good"O hay i did shim up the back ot the scope.

 

[HDMurex]

Heya buddy, funny you should ask that question. I have a Puncher Nemesis (P. KNIGHT GEN 1.0), also in .25 that also throws way right and low compared to my other guns. So far low and right that none of my scopes will adjust POA (point of aim) to POI (point of impact).

My solution was to shim the scope rings using a folded piece of masking tape under the rear left side of the rear scope rings. That pushes the scope front side to the right (effectively). I was able to use that gun to compete at a couple of bench rest matches with my tape shim method.

I understand that may not work for you if you want to play caliber swap bingo on the daily. My gun is shooting about 54 FPE with a Donny Tatsu and a few minor mods. It is quiet and accurate and gets a huge number of shots on the plateau. I will be happy to chat anytime about the Knight/Nemesis.

Shoot'em good!

I'm not there yet ... I'd love to either a) fix it myself, b) pay someone to fix it for me or c) I'll go your route and shim the scope.

 

[L.Leon]

I'm not there yet ... I'd love to either a) fix it myself, b) pay someone to fix it for me or c) I'll go your route and shim the scope.

Reach out to @thammer, he specializes on these guns. He helped me when I was having problems with my Reximex RP. Good luck.

 

[HDMurex]

I’ll do that when my account gets permission to send pm’s. Thank you for the. Info!

 

[Rich_B]

I have that rifle also. I did some machine work to the end cap and made a washer for the end of the barrel to center it in the shroud. Kral’s way of doing things on that end of things kinda sucks. I’m not fast on turn around time, but if you want to send me your end cap, I should be able to fix you up.