Looking for a narrow width scope mounted 1" bubble level

[TG59]

Has anyone found a source for a narrow width (12mm or less) 1" scope mounted bubble level?

Most that I have seen are 14mm or wider which won't fit my gun unless I move the rings - which I am tying to avoid.

 

[maxtrouble]

Have you seen these? I have purchased them but not installed yet.

BKL Technologies - 12-Way and Ring Mount Scope Levels - Made In The USA

We manufacture the largest selection of airgun scope mounts and rimfire rifle scope mounts in the U.S. Our competition-grade scope mounting system includes mounts, rings, adapters, and risers that utilize a quick-installing and self-aligning clamping system that fits both 11mm and 3/8" dovetails.

www.bkltech.com

Good luck!

 

[TG59]

Maxtrouble,

I havn't seen that type yet.

Can you tell me how wide they are?

 

[nervoustrig]

Many of the scope-mounted levels I'm accustomed to using are under 14mm wide (thick)...usually just a little larger than an M4 socket head cap screw. Closer to 10mm and rarely larger than 12mm.

This one for sure based on the description that the spirit level is an 8mm tube:

https://www.amazon.com/YOTOM-Scope-Bubble-Riflescope-2-Pack/dp/B089GN4MS8

And this one based on the photos and the Q&A section:

https://www.amazon.com/ApexHorizon-Discovery-Riflescope-Shooting-Anti-Cant/dp/B07KW4G6TP

Just a couple of examples among many.

 

[BeeZee]

Just check my Vortex bubble level and it is 12.64mm. thick. They are a little bit on the pricey side.

 

[TG59]

Given that width clearance is a concern for many it is surprising that manufacturers don’t state this dimension.

I purchased these and found that they were 14.65mm width: Hunting Alloy Bubble Spirit Level for Rifle Scope Laser with 30mm to 1" Reducer