LGV Spare Parts???

[intenseaty22]

Does anyone know where one can get spare parts for the LGV guns? I chose the platform for some really solid reasons, and I would like to keep both of my guns, or at minimum one of them for the long haul. That means at some point needing a seal etc. 

I know where to get a spring, but not sure about the seals, etc. Any help would be appreciated. 

Thanks!

 

[crittahitta]

Do they make the LGV anymore? Cause i can only find LGU now. Beautiful rifle. I would contact Umarex directly and order what you might need.

 

[intenseaty22]

Do they make the LGV anymore? Cause i can only find LGU now. Beautiful rifle. I would contact Umarex directly and order what you might need.

Yes; it is still available. Some models anyway. Albeit most are only available from Europe. I got both of mine from Krale. AoA had one available, but I didn’t favor it. I will maybe try calling them, I have heard mixed reviews of their customer service. Their website also shows nothing of parts of the LGV, but I will look again. 

 

[Coldair]

AofA perhaps? I would think since they sell the Walthers and service what they sell, they should have spare parts for them. Worst case scenario T.W.Chambers UK.



CA

 

[intenseaty22]

Thanks. Will look into these avenues. Umarex Website says to call the #, that parts are not available for sale on internet. Go figure, it’s only 2018. 

 

[RogerV53]

I found a couple

https://www.kotte-zeller.de/walther-service-kit-16-joule-fuer-lgv-luftgewehre-inkl-kolben-feder-und-fett

Jagd- und Sportwaffencenter Gotha 

 

[intenseaty22]

Thanks. I found the last one you list. But it’s not like Krale that’s in English and easy to use & buy. I searched Krale for parts, no go. 

 

[DualMagMike]

JG Airguns & Gunparts corp if you mean the vintage type

Here are my Walthers;

 

[RogerV53]

Thanks. I found the last one you list. But it’s not like Krale that’s in English and easy to use & buy. I searched Krale for parts, no go.

I did email Krale about parts and they said they do have the rebuild kits, don't know if they show on there web sight.

 

[DrPutz]

I emailed Umarex/Walther lady ([email protected]) that was presenting at the 2018 Pyramyd Air Cup, but she hasn't responded to me yet. The Vortex Tx200 kits work for the springs, but I have not found a seal or piston washer/bearing replacements yet. Maybe if a few folks email her, then maybe we'll see some spare parts show up. We can also check with Pyramyd Air, they seem to be a supplier as well.



Dan

 

[intenseaty22]

JG Airguns & Gunparts corp if you mean the vintage type

Here are my Walthers;

No, I meant the more modern LGVs as in LGV Master Pro, etc. 

 

[intenseaty22]

Thanks. I found the last one you list. But it’s not like Krale that’s in English and easy to use & buy. I searched Krale for parts, no go.

I did email Krale about parts and they said they do have the rebuild kits, don't know if they show on there web sight.

So, I have seen these “rebuild kits” but what I am afrafter really is just the seals and spare parts. The springs are fairly easy to find. 

 

[intenseaty22]

@DrPutz Gonna have to call/email them and see if I can ruffle any feathers. 

Thanks. 

 

[Richardo]

Hi Intenseaty22. This link may help.

https://www.jgairguns.biz/catalog/index.php?manufacturers_id=24&sort=2a&filter_id=348

Cheers. Richardo

 

[intenseaty22]

I will check the link out, thank you! 

 

[intenseaty22]

OK. Here’s an update. Called Umarex USA. Phone was answered by a human very quickly. They sell these things only on the phone, however......They said the parts for the Master Pro are different and will need to be ordered from The Netherlands, where I got the gun from. Arggggg

 

[RogerV53]

OK. Here’s an update. Called Umarex USA. Phone was answered by a human very quickly. They sell these things only on the phone, however......They said the parts for the Master Pro are different and will need to be ordered from The Netherlands, where I got the gun from. Arggggg

That sucks, if you order I would like a couple sets of seals for my .177 master pro, I'll pay half the shipping to you and all to me.

 

[intenseaty22]

OK. Here’s an update. Called Umarex USA. Phone was answered by a human very quickly. They sell these things only on the phone, however......They said the parts for the Master Pro are different and will need to be ordered from The Netherlands, where I got the gun from. Arggggg

That sucks, if you order I would like a couple sets of seals for my .177 master pro, I'll pay half the shipping to you and all to me.

I will probably reach out to them soonish & at least inquire. I will keep you posted. Maybe others would want to get in on it, would bring cost of shipping down. 

 

[Crutcherro1]

I’m in. 

Crutch

 

[Crutcherro1]

I found this discussion on GTA. This is a link to the site Hector referenced. Too bad I can’t read German.

https://www.waffencenter-gotha.de/shop/Ersatzteile/Luftdruckwaffen/HERSTELLER-MODELL/WALTHER/WALTHER-Luftgewehre/Walther-LGV:::11_12_614_307_562_1309.html