Leshiy barrel storage

[Jack.K]

how are Leshiy owners store and protect their extra barrels when not in the gun? 

 

[azccj]

I have 5 Leshiy barrels and with 1 installed in the gun that leaves 4 that need storage. I went to Home Depot and bought a length of hard plastic tubing along with end caps. I glued one cap to the end of an appropriate sized piece of tubing and glued a threaded cap to the other end. Works perfect.

 

 

[Jack.K]

I have 5 Leshiy barrels and with 1 installed in the gun that leaves 4 that need storage. I went to Home Depot and bought a length of hard plastic tubing along with end caps. I glued one cap to the end of an appropriate sized piece of tubing and glued a threaded cap to the other end. Works perfect.

Great idea! PVC tube does it again. Thanks 

 

[golfer70]

That’s genius! Well done. 

 

[Joekrooz]

Man, I thought I was organized great idea azccj!

 

[Elbowgrease]

I also use PVC tubbing. Works great. I did put a bit of foam padding in each end in the caps (one side is glued on) to hold the barrel in place and to keep it from rattling around.

 

[azccj]

I also use PVC tubbing. Works great. I did put a bit of foam padding in each end in the caps (one side is glued on) to hold the barrel in place and to keep it from rattling around.

I did the foam at both ends too. The foam Pyramid Air uses to pack their pellets in for shipping works great.

 

[Elbowgrease]

I also use PVC tubbing. Works great. I did put a bit of foam padding in each end in the caps (one side is glued on) to hold the barrel in place and to keep it from rattling around.

I did the foam at both ends too. The foam Pyramid Air uses to pack their pellets in for shipping works great.

Ha. I used the same stuff.

 

[Jack.K]

I also use PVC tubbing. Works great. I did put a bit of foam padding in each end in the caps (one side is glued on) to hold the barrel in place and to keep it from rattling around.

I did the foam at both ends too. The foam Pyramid Air uses to pack their pellets in for shipping works great.

Ha. I used the same stuff.

Thanks you both for your input. Here is my result from a trip to HomeDepot. 

 

[azccj]

I also use PVC tubbing. Works great. I did put a bit of foam padding in each end in the caps (one side is glued on) to hold the barrel in place and to keep it from rattling around.

I did the foam at both ends too. The foam Pyramid Air uses to pack their pellets in for shipping works great.

Ha. I used the same stuff.

Another thing you can use those Pyramid Air pellet foam things for is an elbow pad when you're shooting from a hard bench. Remove the inner circle of the foam and your elbow sits in the hole and never touches the bench. Prior to doing this my right elbow got really sore from resting it on the bench. Now with the foam pad, no more pain. Try it you'll love it!