EDgun Leshiy 2 wont fire, Help!

[scottblair]

So glad I don’t own any L2s any more anyway good luck

I'm with ya. I owned an L2 for a couple years. I learned how to keep it indexing by modifying the R2D2 internal plunger travel. Got it indexing reliably. Also modded the trigger with a spring plunger screw, for a nice 2 stage trigger feel. But I never enjoyed an 8 shot mag on a semi auto. Got the Huben K1 & GK1..... 19 shot mag, now that's how a semi should be! Never regretted selling the leshi.
YMMV.

 

[PasadenaMike]

I'm with ya. I owned an L2 for a couple years. I learned how to keep it indexing by modifying the R2D2 internal plunger travel. Got it indexing reliably. Also modded the trigger with a spring plunger screw, for a nice 2 stage trigger feel. But I never enjoyed an 8 shot mag on a semi auto. Got the Huben K1 & GK1..... 19 shot mag, now that's how a semi should be! Never regretted selling the leshi.
YMMV.

Glad you found your solution I just kept the L1 It never has feeding problems

 

[Jimbobeast]

I checked the videos and then the gun. It was obvious that the transfer port o-ring and holder had come out. Amazingly I found it intact, re-installed it with some o-ring lube and once again all is well. Thanks for the advice.
Just FYI, I have done zero mods to this gun. I am happy with the performance, but, just for grins, what would be the first mods you would make?

 

[PasadenaMike]

I checked the videos and then the gun. It was obvious that the transfer port o-ring and holder had come out. Amazingly I found it intact, re-installed it with some o-ring lube and once again all is well. Thanks for the advice.
Just FYI, I have done zero mods to this gun. I am happy with the performance, but, just for grins, what would be the first mods you would make?

Good don’t modify a thing it’ll make the gun fail unless it’s cosmetic like a grip or something

 

[BrocStar]

I have a similar problem to the op but different. If I fold and unfold my Leshiy 2, it fires perfectly. If I put it on "safe" and then "fire", I get nothing until I fold/unfold again. The safety seems to drop the trigger rod. Any thoughts?

I have the same problem. Edgun said it might be an ammo issue but I have had it happen with about 5 different projectiles. Did you find out what is causing this?

 

[coastal drifter]

I took the trigger mechanism apart. Nothing bent. I told her she was a good Leshiy, oiled all the pivot points, reassembled everything and voila, she fires perfectly again. Hopefully this will last.

some respond to sweet talking

 

[coastal drifter]

I had one for a couple years without any issues. was shortly after they came out. The only thing took a little getting used to was the trigger. Hard to beat for hunting at "airgun" distances. I had the short version in .22