Finally got me a Leshiy 2 REPR. Came shooting as expected right at 900 fps (which is ideal for most people), but I wanted to dial it back a bit for some steel plinking drills.
I used the OEM REPR adjustment tool to reduce the velocity of the 18g pellets to 830 fps (27 FPE). I ran it through the chonograph while detuning it and for about 3 magazines afterwards
A few days later I found some time to mount the scope & dot, and clean the barrel.
Then I went to top off the air reservoir and "pffffft" all of the air slowly drained out of the regulator.
Problem? Solution? Thanks!
Kinda wanted to try out my new steel targets today.
-Michael
I used the OEM REPR adjustment tool to reduce the velocity of the 18g pellets to 830 fps (27 FPE). I ran it through the chonograph while detuning it and for about 3 magazines afterwards
A few days later I found some time to mount the scope & dot, and clean the barrel.
Then I went to top off the air reservoir and "pffffft" all of the air slowly drained out of the regulator.
Problem? Solution? Thanks!
Kinda wanted to try out my new steel targets today.
-Michael