I recently purchased a first generation Lelya and wanted to see if anyone knows the maximum feel pressure as well as the velocity? It’s a .22 currently shooting the JSB 18.1 around 775fps
Lelya Gen 1fill pressure
- Thread starter JakeRico
- Start date
I just found this:
I am trying to post a picture but it’s not working. I will just text it to you.
I am trying to post a picture but it’s not working. I will just text it to you.
Upvote 0
There around ... Picked up myself a .20 Gen1 LELYA just last summer.
She’s a beauty, what a unique little rifle. I absolutely love it.
Do you know if they have a regulator?
Upvote 0
I’ve had one for a couple years now. Fun little gun. Max fill pressure is 250 bar. I have the 20 cal shooting about 20 FPE. Gets 30 shots per fill with the Huma reg at 115 bar. Very accurate little gun.
Upvote 0
I’ve had one for a couple years now. Fun little gun. Max fill pressure is 250 bar. I have the 20 cal shooting about 20 FPE. Gets 30 shots per fill with the Huma reg at 115 bar. Very accurate little gun.
I appreciate the information, mine appears to be operating properly but I would like to get a Huma regulator in case problems arise with the original. I didn’t see a regulator for it on Edgun West site may need to check out Huma’s site.
Upvote 0
Its not that the EDGun reg is bad, its just big and takes up a much larger portion of the pressure tube than the Huma reg. The Huma is much smaller with a larger plenum. Allows lower reg pressure and more shots per fill. I got 18 shots per fill with the stock reg at stock reg pressure. I get about 30 with the Huma reg...
Upvote 0
Centercut.. Since this rifle is so rare there’s not a lot of information out there. I can’t thank you enough for the info! I’ll see if I can’t locate one and order it this evening.
Upvote 0
No problem. I'd probably start around 125 bar with a .22 and shoot the regular JSB Exact 15.9s instead of the Heavies. I think around 800 fps will get you good performance and efficiency. Let us know how it goes...
Upvote 0