I recently installed a LDC on my Galatian. At 20yds I couldn't hit a 2ft x 2ft target. Took it off and gun was spot on. I can't notice any nicking in the LDC. Anyone else ever had an issue like this.
LDC Accuracy Issue
- Thread starter Jotis2424
- Start date
place a bit of decent tape as cover over the hole where the pellets leaves the LDC and see if the pellets exits through the center. If the pellet doesn't exit through the center there is a high probability that your pellets are nicking somewhere..
Upvote 0
Will do. Thanks for your help. Hopefully I can get it figured out. Love how much quieter my gun is with it.
Upvote 0
if it is coming out off center it doesn't even need to be clipping - the turbulence can sometimes throw it off and make the pellet unstable.
Question - is it definitely 'shotgunning' or is it perhaps just the usual, albeit maybe more than usual, change in POI with the moderator causing it to miss the paper?
Question - is it definitely 'shotgunning' or is it perhaps just the usual, albeit maybe more than usual, change in POI with the moderator causing it to miss the paper?
Upvote 0
I'm not sure what"shotgunning" is, but it was shooting consistently right. At 20 yes was completely missing a 2ft x 2ft target. Moved to 10 yds and was hitting about 10 inches right of we're i was aiming. Take it off and right on the money.
Upvote 0
That is quite a bit, but was it a tight group? If so take it off, put a small washer on and then put it on. This will put the exit hole in a different spot. If it groups in a different spot then it is off-center and the turbulence is causing it to follow the LDC exit.
Upvote 0
No. It was about a 2 inch group at 10 yds. I'll try what your saying if the damn wind stops blowing. Thanks
Upvote 0