What donny moderator would you guys slap in this in .22 would tanto suffice would you get it in .25 .22
Kral np03 moderator
- Thread starter RBD2
- Start date
I modified mine to vent to the factory shroud and use a Tanto. I would go 25cal Donny for a 22cal gun and go 1 step bigger than the Tanto. Even with the shroud and Tanto it's not a whisper. Definitely back yard friendly no doubt but a sumo will be my next purchase.
Upvote 0
Sumo makes it very quiet. was recommended by DonnyFL and very pleased. I think it could be fine with the next size down actually.
Upvote 0
How does the sumo fit on the factory threading? I saw in another thread there was a gap and the supressor had to be modified to sit flush.
Are you direct to factory threads or did you buy the donnyfl adapter?
Upvote 0
the refurb NP-03 .22 i just received friday has 1/2x20 threads for a moderator
and it fits perfect with no gap.
and it fits perfect with no gap.
Upvote 0
The Kral NP03 already has a 1/2-20 UNF adapter at the end of the shroud.
That adapter would cost $40-$50 if you decided to spend the money at Donny FL.
You can use any moderator with a 1/2-20 thread.
Most airgun moderators have the 1/2-20 UNF thread.
I am 3D printing my moderators now for myself.
The cost for a 3D printed moderator is:
-$1 or less in PLA filament
-2-15 minutes deciding which moderator to print and what printer settings to use
-3-6 hours of print time, usually over night
That adapter would cost $40-$50 if you decided to spend the money at Donny FL.
You can use any moderator with a 1/2-20 thread.
Most airgun moderators have the 1/2-20 UNF thread.
I am 3D printing my moderators now for myself.
The cost for a 3D printed moderator is:
-$1 or less in PLA filament
-2-15 minutes deciding which moderator to print and what printer settings to use
-3-6 hours of print time, usually over night
Upvote 0
I have a lot of buck rail 3D printed products on my 1322 including moderator and they are all excellent.
Upvote 0
I have a refurbished .22 coming so hope my sumo fits flush.
This is the thread I referenced post #52 onwards. I see a shoulder at the base of the np03 threads that didn't fit the donnylf can
Kral Information Thread. “Contribute what you know “
There doesn’t seem to be a wealth of knowledge on the Krals. Bits and pieces everywhere. So I was thinking maybe a single thread of the most common question and quirks of the krals. In my short quest Fill prob o ring. -11/32 x7/32x 1/16 Marauder Baffles work with the Puncher breaker silent...
www.airgunnation.com Upvote 0
yes i also read that, must be 2 different kinds.....I have a refurbished .22 coming so hope my sumo fits flush.
This is the thread I referenced post #52 onwards. I see a shoulder at the base of the np03 threads that didn't fit the donnylf can
Kral Information Thread. “Contribute what you know “
There doesn’t seem to be a wealth of knowledge on the Krals. Bits and pieces everywhere. So I was thinking maybe a single thread of the most common question and quirks of the krals. In my short quest Fill prob o ring. -11/32 x7/32x 1/16 Marauder Baffles work with the Puncher breaker silent...
Upvote 0
no its not a donnyfl, i dont know where it come from....i got it in a trade
it works great !
Upvote 0
My .177 NP-03 showed up about two hours ago. First PCP with a probe which needed an adapter. Thats just dumb.
Anyway, it has a good bark out of the box but I screwed on a Benjamin baffle with CF tube and it is real nice now.
Seems to be quite a tack driver with a cheap 6x scope and Apolo 9 gn dome pellets. Have not cleaned or adjusted at all. Stock feels cheap and the grip does not fit my hand at all (comfortably) but will with some filing.
For under $190 shipped I am really happy with this purchase.
Anyway, it has a good bark out of the box but I screwed on a Benjamin baffle with CF tube and it is real nice now.
Seems to be quite a tack driver with a cheap 6x scope and Apolo 9 gn dome pellets. Have not cleaned or adjusted at all. Stock feels cheap and the grip does not fit my hand at all (comfortably) but will with some filing.
For under $190 shipped I am really happy with this purchase.
Upvote 0
Mine is out for delivery to the UPS store.
Being a 'refurb' do you see any signs of use on the rifle?
Upvote 0
Sorry I missed your question.
I'm sure you have yours by now but no, there was no sign it was ever fired. There was air in the tank but the mags did not look to have been inserted, they are a tight fit and they look used now.
How about yours now that you have it?
Are you happy with it?
Upvote 0
Super happy! No marring or signs of use but signs of maintenance like oil residue so that was good!
Shoots great I'm 100% loving it and the whole rig. Has a sumo up front with magpul bipod and hawke 3-9 x40 with utg POI rings. Medium height.
Upvote 0