Kral NP03 .22 pellets it likes

Hello so just got my kral npo3 and so far I'm impressed with looks and handling of the gun trigger is pretty nice surprisingly. My question is what pellets do the kral guns typically like in this power range. Haven't did any chrony work yet just cleaned barrel And mounted scope max range is 50 yards for me plan to mostly hunt ground squirrel or birds with this. 
 
So I did some chrony work today not sure if this is typical. 



Power setting at 3/4 almost max.

Pellet used 13.43 jsb

200 bar fill down to 160 bar

Shot 1 874

Shot 2 873

Shot 3 860

Shot 4 855

Shot 5 855

Shot 6 854

Shot 7 853

Shot 8 850

Shot 9 839

Shot 10 834

Shot 11 830

Shot 12 829

How many consistant shots should I expect from this later I'll shoot past 160 bar to see if maybe the sweet spot is under 160 bar but was getting loud lol waiting on donny fl. I plan to use these pellets or the 14.3 or the 15.8 in jsb but waiting on those pellets to arrive.




 
Isfun I had an air force escape ss Wich is pretty close to talon p except quieter. It is a good gun but the egronomics are not for everyone I had a hard time shooting it accurately consistently but that was probably more me than the gun the egronomics didn't fit me well. So far the NP03 egronomics fit me better but for sure less power depends probably what you plan to use it for and if you can live with egronomics of the rifle. I currently also have a taipan veteran compact and a hatsan flash and in do fine with those I think it more about your shooting style and how the gun fits you.
 
Kkarmical: Thank you. Anything else pro and con about TalonP won over NP03?

Power adjustability with the TalonP is better. If you add the ring loc kit or talontunes adjustable tophat depending on which talonp you have, the ability to adjust power levels with the power wheel offers so many different settings.

It's also a more compact fit carbine, whereas the NP-03 is a rifle with a removable collapsible stock.

I've had a couple issues with my NP-03, haven't had a single problem with the TalonP, very simple platform.
 
So I did some chrony work today not sure if this is typical. 



Power setting at 3/4 almost max.

Pellet used 13.43 jsb

200 bar fill down to 160 bar

Shot 1 874

Shot 2 873

Shot 3 860

Shot 4 855

Shot 5 855

Shot 6 854

Shot 7 853

Shot 8 850

Shot 9 839

Shot 10 834

Shot 11 830

Shot 12 829

How many consistant shots should I expect from this later I'll shoot past 160 bar to see if maybe the sweet spot is under 160 bar but was getting loud lol waiting on donny fl. I plan to use these pellets or the 14.3 or the 15.8 in jsb but waiting on those pellets to arrive.




I'd shoot full power and adjust the hammer spring to the level you're after.

I shoot my .25 200 to 100 bar.
 
1600020542008.1600020570.jpg


These shoot really well in my .22 puncher breaker.

I use them in .25 in my NP-03, a very underrated pellet.
 
  • Like
Reactions: silvershooter589