Any info on this gun? It’s available through krale, but I don’t see anything about it state side.
does anyone have one?
does anyone have one?
Kral NP-500
- Thread starter madeintheuk
- Start date
Nice carbine! The 500cc bottle means lots o' shots in a very light platform. My Knight/Nemesis is shooting 120 full power shots in . 25, stock outta the box.
Get one
and be a trend setter.
Get one
and be a trend setter.Upvote 0
I like your thinking. I am a little worried about warranty though, and sourcing parts after the fact
Upvote 0
I've noticed the reviews about most Kral guns a good but no one really talks about them much. I've seen a couple YouTube videos on the Kral Puncher Jumbo that is about 1-2yrs old but much about the Knight or NP-500 which is probably the same platform just different stocks.
I'm with JimNM buy one and tell us about it..
I'm with JimNM buy one and tell us about it..
Upvote 0
I know a lot of people don't like Facebook, but I'm in a Kral owners group that is international and all we talk about is the Kral platform.
If you're interested let me know I can send you a link to the one I'm on.
There's a lot of content and non YouTube videos there..
Upvote 0
I could just hold out for the possibility of the puncher jumbo dazzle coming here. All I’ve seen on it so far looks amazing!!
Upvote 0
@kkarmical, please send me the link. Thanks
@madeintheuk, is the dazzle coming to the U.S.?
@madeintheuk, is the dazzle coming to the U.S.?
Upvote 0
Nice carbine! The 500cc bottle means lots o' shots in a very light platform. My Knight/Nemesis is shooting 120 full power shots in . 25, stock outta the box.
Get oneand be a trend setter.
What kind of speeds are you getting with that shot count?
Upvote 0
Have not chronograph tested yet. I am a bit low on ammo and am making myself save it for pest work. I am shooting AA domes (best so far at 40 yards)mostly. The . 25 Hatsan vortex shoot well, but are out of stock at the moment. The Hades shoot minute of rabbit, but not as well as the other two I listed.
Upvote 0
me too. found a site in eastern europe that carries them. if my math is right, $600 to 720 ....
i emailed kral about who in the US carries them, or if i can or directly from them....
the BigMax X looks cool too
Upvote 0
No one in the US currently carries them. Airventuri/PA is the US importer for kral. It's the bottle and valve from a Pro500 on an NP-03 breech in a tactical stock. Kral guns are pretty much legos and most parts are interchangeable between models.
Upvote 0
Not my gun..
So to go NP-03 to 500cc bottle all that is needed is the valve and bottle.
A carbon fiber regulated bottle with a modded valve sounds interesting..
Make a barrel band to go around the bottle, I could see me going down this road.
Upvote 0
Not my gun..
So to go NP-03 to 500cc bottle all that is needed is the valve and bottle.
A carbon fiber regulated bottle with a modded valve sounds interesting..
Make a barrel band to go around the bottle, I could see me going down this road.
Krale in the Netherlands delivers to the us, and they carry a np500 which is basically a np03 with a 500cc bottle. The barrel is the same as the np03 though. Are barrels interchangeable between guns? Would there be a way of putting the pro 500 barrel on this setup? Or something similar to give a little more accuracy?
https://www.krale.shop/en/kral-arms-np-500-s/
Upvote 0
Not my gun..
So to go NP-03 to 500cc bottle all that is needed is the valve and bottle.
A carbon fiber regulated bottle with a modded valve sounds interesting..
Make a barrel band to go around the bottle, I could see me going down this road.
Krale in the Netherlands delivers to the us, and they carry a np500 which is basically a np03 with a 500cc bottle. The barrel is the same as the np03 though. Are barrels interchangeable between guns? Would there be a way of putting the pro 500 barrel on this setup? Or something similar to give a little more accuracy?
https://www.krale.shop/en/kral-arms-np-500-s/
The shroud is smaller diameter on the NP-03 and NP-500. You can use the longer barrel and shroud from the Pitbull though. They share the same breech.
Upvote 0
That looks awesome. What did you use to make the bottle work with it? And what barrel is it?
Upvote 0
The drop-block came from a Ekinoks Semi-Auto , I bought the rifle just for the block when PA had a large price drop to move their inventory of them . The 580cc carbon fiber tank came from Talon Tunes . Huma external regulator . Barrel ordered from PA , Knight model 24" barrel caliber change kit . Carbon fiber shroud 13/16" x 0.941" . 20.125" length from Clearwater Composites , metric tap 21mm x 1mm right hand thread .
Steve
Steve
Upvote 0