KRAL NP-03 issue

[barryc]

I have a Kral NP-03. When I’m firing I can feel the air pushing back onto my face. I replace the breach Oring but that have not solved it. Can any please help me?

 

[Perle]

Is it shooting Erraticly

 

[pat585]

Since you had to pull your barrel off to replace your breech o-ring, I would think when you re- installed your barrel the transfer port & the barrel hole are not lined up. There are detents on the barrel that must be lined up with the hold down screws.

 

[Perle]

He posted once.

 

[barryc]

Is it shooting Erraticly

Shoots fine just down on power

 

[barryc]

Since you had to pull your barrel off to replace your breech o-ring, I would think when you re- installed your barrel the transfer port & the barrel hole are not lined up. There are detents on the barrel that must be lined up with the hold down screws.

 

[barryc]

Since you had to pull your barrel off to replace your breech o-ring, I would think when you re- installed your barrel the transfer port & the barrel hole are not lined up. There are detents on the barrel that must be lined up with the hold down screws.

I was doing it before I changed the Oring and I haven’t removed the barrel

 

[pat585]

Does it make a difference when you adjust the power wheel up or down? When you say low power, do you have any Chrony readings. This may help you.

kral puncher np-03 schematic diagram - Bing

Intelligent search from Bing makes it easier to quickly find what you’re looking for and rewards you.

www.bing.com