Bad thing about Tuesday deliveries is I will have to wait till Friday to delve deep
Still look what FedEx just dropped off
Still look what FedEx just dropped off
Kral Mega .177 Tuesday Delivery
- Thread starter Willie14228
- Start date
Congrats on the Kral.
You're going to love that chrono; it does all the calculations for you, except FPE and doesn't require hook-up to an external device to do it.
The IR light kit was worth the money; it's 100% reliable with that. Outside on a hazy day it is also good without the diffusers, but you DEFINITELY need the diffusers on a sunny day.
You're going to love that chrono; it does all the calculations for you, except FPE and doesn't require hook-up to an external device to do it.
The IR light kit was worth the money; it's 100% reliable with that. Outside on a hazy day it is also good without the diffusers, but you DEFINITELY need the diffusers on a sunny day.
Upvote 0
Thanks Smaug
Got to admit even on my short inspection of the Kral I am impressed.
Some key notes that I have come across already is that you need a highrise scope mount to use the magazines they will not fit under a normal scope mount will update when I get a little more time... hopefully this evening if not then tomorrow
Got to admit even on my short inspection of the Kral I am impressed.
Some key notes that I have come across already is that you need a highrise scope mount to use the magazines they will not fit under a normal scope mount will update when I get a little more time... hopefully this evening if not then tomorrow
Upvote 0
Ill tell ya, my only gripe so far with my Puncher Breaker is the extremely low placement of the scope mounting rail. I am on my 4th set of mounts now to get the damn scope high enough. I just ordered the see throughs as the highs just did not do it. Further complicating the issue is that I wanted them to be silver to match the marine 
Upvote 0
Nice lookin' hood ornaments Willie. Wow, it's like Christmas in March ;-)
Best of shooting with you new rifle and gear.
Fuss
Best of shooting with you new rifle and gear.
Fuss
Upvote 0
Willie- a quick inspection of the shroud going through the barrel band showed it was off to one side. I thought the barrel was simply off center from the factory. When I loosened the set screw, the barrel sprung, yes sprung, to its neutral position. Apparently, it's abuse from shipping caused the barrel to twist to one side. So, before you start shooting, loosen the barrel band and center it as best you can around the shroud. Good luck
Upvote 0
Okay so I will get some pics up in the morning, For my high-rise scope mounts I raided my Black Powder drawer and found a set that I bought at Walmart of all places they are see through and the perfect height. I sold my 6x24 Sun Optics Scope with the bulldog (Brain Fart) so my scope mounts wasn't the only thing that got stolen out of my Black Powder drawer It so happens I have a Thomson Center 3x9 aint pretty and isn't the most expensive scope on the market but its another cheap but good product. The glass is good and it has a close focus
I mounted the Bottom rail and unlike the others with synthetic stocks it did fit well and the screw tightened nicely. That being said the rail does have two what looks like blank spots on each end that some screws could be used to insure that the rail doesn't turn or move. I am not real sure what I will do haven't had but a really quick look at everything.
Unfortunately the two utility tools I don't have and didn't get is a trigger weight tool nor a sound meter.
I did have a chance to run a few rounds through just to see how the trigger and action feels.
While I did feel some very small amount of gritty feeling coming up into the second stage it still felt good and the "stop " was a solid I know its there with a clean snapping break. I personally like a hard stop into the second stage.
Thanks again
I mounted the Bottom rail and unlike the others with synthetic stocks it did fit well and the screw tightened nicely. That being said the rail does have two what looks like blank spots on each end that some screws could be used to insure that the rail doesn't turn or move. I am not real sure what I will do haven't had but a really quick look at everything.
Unfortunately the two utility tools I don't have and didn't get is a trigger weight tool nor a sound meter.
I did have a chance to run a few rounds through just to see how the trigger and action feels.
While I did feel some very small amount of gritty feeling coming up into the second stage it still felt good and the "stop " was a solid I know its there with a clean snapping break. I personally like a hard stop into the second stage.
Thanks again
Upvote 0
Just couldn't resist the temptation
30 yards NRA 10 meter target no real break in 3x9 scope first set one shot per ring score 62
30 yards NRA 10 meter target no real break in 3x9 scope first set one shot per ring score 62
Upvote 0
Upvote 0
I reused a target the one pellet hole all by itself was a single shot run through the 13 is in the quarter group
Upvote 0